6" SPINOX 30-13 (11 kW, 400 V) - multistage stainless steel submersible pump, IPRO oil-filled motor
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump made entirely
of AISI 304 stainless steel, designed to draw and pump clean, technically raw water
from drilled deep wells with a minimum internal diameter of 160 mm. The pump
is driven by an IPRO IOM oil-filled motor. The series includes a range of models with varying
hydraulic parameters and a wide power range, allowing you to select a model to suit the needs of
a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand - a capacity of 415 l/min allows extensive irrigation systems for fields, orchards, and covered crops to be supplied from a single source.
-
Managers of multi-family buildings and housing developments - a single deep well can supply water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors - the increased flow rate is suitable for systems requiring large quantities of water, including hydrant systems and fire protection tanks.
-
Industrial plants and companies carrying out dewatering work - drawing process water and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, housing developments, and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
WDepending on the capacity of the selected model, 6" SPINOX pumps with an IPRO oil-filled motor
are suitable for supplying a single larger facility as well as installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 30-13 submersible pump
(11 kW, 400 V) with an IPRO oil-filled motor is selected individually to match the parameters of
the specific well - its depth, diameter, and required capacity.
The 6" SPINOX pump is not a water treatment device and does not confirm
that the water is suitable for human consumption – if the water is to be used for drinking,
cooking or other household purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all
key structural components – the suction and discharge ports, housing, shaft, impeller and
diffuser – are made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when pumping raw water that may
contain fine mineral contaminants. The mechanical seal is made of
ceramic / SiC / NBR. The pump is factory-equipped with a check valve,
which prevents water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO IOM oil-filled motor, cooled and lubricated by oil contained
in the motor’s sealed chamber. The power cable length is selected for the specific
device variant and well depth. The pump operates continuously, in a vertical
or horizontal position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- IPRO motor: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 30-13
- Motor power: 11 kW
- Power supply: 400 V
- Motor design: oil-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge port, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical specifications may vary by production batch – we recommend checking the device nameplate before installation.
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to
draw and pump raw / untreated water from large-diameter drilled deep wells before treatment – including for
supplying multifamily buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The model selection depends on the well's depth and diameter and the installation's required flow rate –
the series includes several hydraulic subcategories with different maximum flow rates and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled
motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How do I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-running protection that works without
requiring additional probes or sensors to be installed directly in the well, simplifying
installation compared with solutions that require separate sensor wiring.
Where can I buy a 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers, and authorized online distributors.
What are the warranty terms for the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
