6" SPINOX 30-11 (9.2 kW, 400 V) - multistage stainless steel deep well pump, IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage deep well pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean, untreated water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with different hydraulic specifications and a wide range of power ratings, making it possible to select a model to suit the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand - a capacity of 415 l/min allows extensive irrigation systems for fields, orchards and greenhouse crops to be supplied from a single source.
-
Managers of multi-family buildings and housing estates - a single deep well can supply utility water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors - the higher flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire protection tanks.
-
Industrial plants and companies carrying out dewatering work - drawing technical water for processes and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, housing estates and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring higher flow rates.
Depending on the output of the selected model, 6" SPINOX pumps with an IPRO water-filled motor are suitable for supplying a single larger property, as well as installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 30-11 submersible pump (9.2 kW, 400 V) with an IPRO water-filled motor is selected individually based on the parameters of the specific well - its depth, diameter and required output.
The 6" SPINOX pump is not a water treatment device and does not certify that the water is fit for human consumption. If the water is to be used for drinking, cooking, or other household purposes, an appropriate water treatment system must be provided, along with water quality monitoring at the point of use.
Features, description, and technical specifications
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge connections, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This design provides increased wear resistance and a long service life when operating in contact with raw water, which may contain fine mineral impurities. The mechanical seal uses a ceramic / SiC / NBR arrangement. The pump is factory-fitted with a check valve to prevent water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO WMC water-filled motor. The power cable length is selected for the specific device configuration and well depth. The pump operates continuously, in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C and with insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 30-11
- Motor power: 9.2 kW
- Power supply: 400 V
- Motor design: water-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch. Before installation, we recommend checking the device’s nameplate.
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX deep well pump with an IPRO water-filled motor
What is the 6" SPINOX deep well pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage deep well pump designed to draw and pump raw / untreated water from larger-diameter drilled deep wells before treatment, including for supplying multi-family buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The right model depends on the depth and diameter of the well and the required system capacity. The series includes several hydraulic subcategories with different maximum capacities and power ratings.
Which motors are available for the 6" SPINOX deep well pump?
The 6" SPINOX hydraulics can be paired, depending on the model, with a 4" or 6" motor: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without installing additional probes or sensors directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy a 6" SPINOX deep well pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our sales partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
