6" SPINOX 30-10 (9.2 kW, 400 V) - multistage stainless steel submersible pump, IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean, untreated water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is powered by an IPRO WMC water-filled motor. The series includes a range of models with different hydraulic parameters and a wide power range, allowing you to choose a model suited to the needs of a specific high-output installation.
Who it's for
-
Farms and orchards with high water demands – the output of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards and covered crops from a single water source.
-
Managers of multi-family buildings and housing estates – a single deep-well water source can supply several buildings or an entire community with utility water in locations without access to the municipal water network.
-
Water supply and fire protection system contractors – the higher flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work – drawing technical water for processes and draining excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family buildings, housing estates and farms with high water demands.
- Supplying extensive irrigation and sprinkler systems, as well as lowering groundwater levels.
- Water supply and fire protection systems requiring higher flow rates.
WDepending on the output of the selected model, 6" SPINOX pumps with an IPRO water-filled motor are suitable both for supplying a single larger facility and for installations serving several buildings or large-scale irrigation systems. The 6" SPINOX 30-10 submersible pump (9.2 kW, 400 V) with an IPRO water-filled motor is selected individually to suit the parameters of each well – its depth, diameter and required output.
The 6" SPINOX pump does not treat water and does not certify that it is fit for human consumption. If the water is to be used for drinking, cooking or other household purposes, an appropriate water treatment system must be provided, and water quality must be monitored at the point of use.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge ports, housing, shaft, impeller and diffuser – are made of AISI 304 stainless steel. This design provides increased wear resistance and a long service life when operating in contact with raw water, which may contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR configuration. The pump is factory-equipped with a check valve to prevent water from flowing back through the discharge pipe after the pump stops.
Powered by an IPRO WMC water-filled motor. The power cable length is selected for the specific device variant and well depth. The pump operates continuously in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 30-10
- Motor power: 9.2 kW
- Power supply: 400 V
- Motor design: water-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge port, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch – we recommend checking the device’s nameplate before installation.
IPRO – 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – 6" SPINOX deep well pump with an IPRO water-filled motor
What is the 6" SPINOX deep well pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage deep well pump designed to draw and pump raw / untreated water from larger-diameter drilled deep wells before treatment – including for supplying multifamily buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Choosing a model depends on the well’s depth and diameter, as well as the required system output. The series includes several hydraulic subcategories with different maximum outputs and power ratings.
Which motors are available for the 6" SPINOX deep well pump?
The 6" SPINOX hydraulic section can be paired, depending on the model, with a 4" or 6" motor: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The product name specifies the exact option (motor type and diameter).
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without requiring additional probes or sensors to be installed directly in the well, simplifying installation compared with solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX deep well pump made by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our retail partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
