6" SPINOX 17-17 (9.2 kW, 400 V) - multistage stainless steel submersible pump, IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping technically clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is powered by an IPRO WMC water-filled motor. The series includes a range of models with different hydraulic parameters and a wide power range, allowing you to select a model to meet the needs of a specific high-output installation.
Who it’s for
-
Farms and orchards with high water demand – an output of 415 l/min allows extensive irrigation systems for fields, orchards and covered crops to be supplied from a single source.
-
Managers of multi-family buildings and housing estates – a single deep well can supply water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system installers – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work – drawing technical water for processes and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, housing estates and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the performance of the selected model, 6" SPINOX pumps with an IPRO water-filled motor are suitable for supplying a single larger facility, as well as installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 17-17 submersible pump (9.2 kW, 400 V) with an IPRO water-filled motor is selected individually to match the specifications of the particular well - its depth, diameter and required output.
The 6" SPINOX pump does not treat water and does not certify that it is suitable for human consumption. If the water is to be used for drinking, cooking or other domestic purposes, an appropriate water treatment system must be provided, and water quality must be monitored at the point of use.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage deep-well pump in which all key structural components – the suction and discharge connections, housing, shaft, impeller and diffuser – are made of AISI 304 stainless steel. This design provides increased wear resistance and a long service life when operating in contact with raw water, which may contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR configuration. The pump is factory-fitted with a check valve to prevent water from flowing back through the discharge pipe after the pump stops.
The pump is powered by an IPRO WMC water-filled motor. The power cable length is selected for the specific device variant and well depth. The pump operates continuously, vertically or horizontally, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage deep-well pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 17-17
- Motor power: 9.2 kW
- Power supply: 400 V
- Motor design: water-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical specifications may vary depending on the production batch. We recommend checking the device’s rating plate before installation.
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX deep-well pump with an IPRO water-filled motor
What is the 6" SPINOX deep-well pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage deep-well pump designed to draw and pump raw / untreated water from larger-diameter drilled wells before treatment. It is used, among other things, to supply multifamily buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The choice of model depends on the well’s depth and diameter, as well as the installation’s required flow rate. The series includes several hydraulic subcategories with different maximum flow rates and power ratings.
Which motors are available for the 6" SPINOX deep-well pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The product name indicates the specific variant (motor type and diameter).
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without installing additional probes or sensors directly in the well, simplifying installation compared to solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX deep-well pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our business partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
