6" SPINOX 17-19 (9.2 kW, 400 V) - multistage stainless steel deep well pump with an IPRO oil-filled motor
The 6" SPINOX with an IPRO oil-filled motor is a multistage deep well pump made entirely of AISI 304 stainless steel, designed to draw and pump technically clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is powered by an IPRO IOM oil-filled motor. The series includes a range of models with varying hydraulic parameters and a broad power range, allowing you to select a model to meet the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand - a capacity of 415 l/min allows extensive irrigation systems for fields, orchards and crops under cover to be supplied from a single water source.
-
Managers of multi-family buildings and residential developments - a single deep well can supply utility water to several buildings or an entire community in locations without access to the municipal water network.
-
Water supply and fire protection system contractors - the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work - drawing process water and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, residential developments and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the output of the selected model, 6" SPINOX pumps with IPRO oil-filled motors are suitable both for supplying a single larger facility and for installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 17-19 submersible pump (9.2 kW, 400 V) with an IPRO oil-filled motor is selected individually to suit the parameters of the specific well - its depth, diameter, and required output.
The 6" SPINOX pump is not a water treatment device and does not certify
that the water is safe for human consumption – if the water is to be used for drinking,
cooking or other household purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all
key structural components – the suction and discharge ports, housing, shaft, impeller and
diffuser – are made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal consists of
ceramic / SiC / NBR. The pump is factory-fitted with a check valve,
which prevents water from flowing back through the discharge pipe after the pump stops.
The pump is driven by an IPRO IOM oil-filled motor, cooled and lubricated by oil in
a sealed motor chamber. The power cable length is selected for the specific
device variant and well depth. The pump operates continuously, in a vertical
or horizontal position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- IPRO motor: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 17-19
- Motor power: 9.2 kW
- Power supply: 400 V
- Motor design: oil-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge port, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary by production batch – before installation, we recommend checking the device’s nameplate.
IPRO – 36 months (3 years) of manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to
extract and pump raw/untreated water from large-diameter deep drilled wells, before treatment – including for supplying
multi-family buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The choice of model depends on the well’s depth and diameter and the required system capacity –
the series includes several hydraulic subcategories with different maximum capacities and power ratings.
Which motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulics can be paired with a 4" or 6" motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled
motor from the Italian brand IBO Italy. The specific configuration (motor type and
diameter) is indicated in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without
installing additional probes or sensors directly in the well, simplifying
installation compared to solutions requiring separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) of manufacturer’s warranty. Dambat provides warranty and post-warranty service.
