6" SPINOX 17-15 (9.2 kW, 400 V) - multistage stainless steel deep well pump, IPRO oil-filled motor
The 6" SPINOX with an IPRO oil-filled motor is a multistage deep well pump made entirely of AISI 304 stainless steel, designed for drawing and pumping technically clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO IOM oil-filled motor. The series includes a range of models with different hydraulic parameters and a wide power range, allowing you to select a model to meet the needs of a specific high-output installation.
Who it's for
-
Farms and orchards with high water demand – the output of 415 l/min can supply extensive irrigation systems for fields, orchards and covered crops from a single water source.
-
Managers of multi-family properties and residential developments – a single deep well can supply domestic water to several buildings or an entire community in areas without access to the municipal water network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work – drawing process water and dewatering excavations and sites with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Supplying water to multi-family properties, residential developments and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the output of the selected model, 6" SPINOX pumps with an IPRO oil-filled motor are suitable both for supplying a single larger facility and for installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 17-15 submersible pump (9.2 kW, 400 V) with an IPRO oil-filled motor is individually selected to match the parameters of the specific well - its depth, diameter, and required output.
The 6" SPINOX pump is not a water treatment device and does not certify
that the water is suitable for human consumption – if the water is to be used for drinking,
cooking or other household purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all
key structural components – the suction and discharge connections, housing, shaft, impeller and
diffuser – are made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal is made using a ceramic / SiC / NBR
combination. The pump is factory-fitted with a check valve,
which prevents water from flowing back through the discharge pipeline after the pump stops.
The pump is driven by an IPRO IOM oil-filled motor, cooled and lubricated by oil contained
in the motor's sealed chamber. The power cable length is selected for the specific
device variant and well depth. The pump operates in continuous mode, in a vertical
or horizontal position, at a maximum pumped liquid temperature of 35°C and insulation class F.
- Device type: multistage submersible pump
- Motor IPRO: IPRO (IOM oil-filled motor)
- Model: 6" SPINOX 17-15
- Motor power: 9.2 kW
- Power supply: 400 V
- Motor construction: oil-filled
- Pump set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge connection, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch. We recommend checking the device's nameplate before installation.
IPRO – 36 months (3 years) manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO oil-filled motor
What is the 6" SPINOX submersible pump with an IPRO oil-filled motor used for?
The 6" SPINOX with an IPRO oil-filled motor is a multistage submersible pump designed to
pump and deliver raw / untreated water from large-diameter deep boreholes before treatment, including
for supplying multifamily buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The choice of model depends on the well's depth and diameter, as well as the system's required output. The
series includes several hydraulic subcategories with different maximum outputs and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulic unit can be paired with a 4" or 6" diameter motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor
from the Italian brand IBO Italy. The specific variant (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without
installing additional probes or sensors directly in the well, simplifying
installation compared with solutions that require separate sensor wiring.
Where can I buy a 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers, and authorized online distributors.
What are the warranty terms for the 6" SPINOX pump with an IPRO oil-filled motor?
IPRO – 36 months (3 years) manufacturer's warranty. Dambat provides warranty and post-warranty service.
