6" SPINOX 17-13 (7.5 kW, 400 V) - multistage stainless steel submersible pump, IPRO water-filled motor
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump made entirely of AISI 304 stainless steel, designed for drawing and pumping clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is driven by an IPRO WMC water-filled motor. The series includes a range of models with different hydraulic performance and a wide power range, making it possible to select a model to suit the needs of a specific high-output system.
Who it's for
-
Farms and orchards with high water demand – an output of 415 l/min makes it possible to supply extensive irrigation systems for fields, orchards and covered crops from a single source.
-
Managers of multifamily buildings and housing estates – a single deep well can supply utility water to several buildings or an entire community in areas without access to the municipal network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire water tanks.
-
Industrial plants and companies carrying out dewatering work – drawing process water and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multifamily buildings, housing estates and farms with high water demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the output of the selected model, 6" SPINOX pumps with an IPRO water-filled motor are suitable for supplying a single larger facility, as well as installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 17-13 submersible pump (7.5 kW, 400 V) with an IPRO water-filled motor is selected individually to match the parameters of the specific well - its depth, diameter, and required output.
The 6" SPINOX pump is not a water treatment device and does not certify
that the water is suitable for human consumption. If the water is to be used for drinking,
cooking or other domestic purposes, an appropriate water treatment system and
water quality monitoring at the point of use must be provided.
Features, description and technical data
The 6" SPINOX with an IPRO water-filled motor is a multistage deep well pump in which all
key structural components – the suction and discharge ports, housing, shaft, impeller and
diffuser – are made of AISI 304 stainless steel. This design provides increased
wear resistance and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal is made of ceramic / SiC / NBR.
The pump comes factory-fitted with a check valve,
preventing water from flowing back into the discharge pipe after the pump stops.
The pump is powered by an IPRO WMC water-filled motor. The power cable length is selected
for the specific device variant and well depth. The pump operates continuously,
in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C
and insulation class F.
- Device type: multistage deep well pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 17-13
- Motor power: 7.5 kW
- Power supply: 400 V
- Motor design: water-filled
- Set diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge ports, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical data may vary depending on the production batch. Before installation, we recommend checking the device’s nameplate.
IPRO – 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw and pump raw/untreated water from larger-diameter drilled deep wells before treatment. It is used, among other things, to supply multi-family buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
The right model depends on the well’s depth and diameter and the required system capacity. The series includes several hydraulic subcategories with different maximum capacities and power ratings.
What motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulic section can be paired with a 4" or 6" motor, depending on the model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled motor from the Italian brand IBO Italy. The product name indicates the specific variant (motor type and diameter).
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without installing additional probes or sensors directly in the well, simplifying installation compared to solutions that require separate sensor wiring.
Where can I buy the 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our business partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.