6" SPINOX 17-10 (5.5 kW, 400 V) - multistage stainless steel deep well pump, IPRO water-cooled motor
The 6" SPINOX with IPRO water-cooled motor is a multistage deep well pump made entirely of AISI 304 stainless steel, designed for drawing and pumping technically clean raw water from drilled deep wells with a minimum internal diameter of 160 mm. The pump is powered by an IPRO WMC water-cooled motor. The series includes a range of models with different hydraulic parameters and a wide range of power ratings, allowing you to select a model to suit the needs of a specific high-capacity installation.
Who it's for
-
Farms and orchards with high water demand – a capacity of 415 l/min allows extensive irrigation systems for fields, orchards and covered crops to be supplied from a single water source.
-
Managers of multi-family buildings and housing estates – a single deep well can supply several buildings or an entire residential community with domestic water in locations without access to the municipal water network.
-
Water supply and fire protection system contractors – the increased flow rate is suitable for systems requiring large volumes of water, including hydrant systems and fire protection tanks.
-
Industrial plants and companies carrying out dewatering work – drawing process water and dewatering excavations and areas with high groundwater levels.
Applications
- Drawing and pumping raw water from larger-diameter drilled deep wells before treatment.
- Water supply for multi-family buildings, housing estates and farms with high demand.
- Supplying extensive irrigation and sprinkler systems, and lowering groundwater levels.
- Water supply and fire protection systems requiring increased flow rates.
Depending on the performance of the selected model, 6" SPINOX pumps with IPRO water-cooled motors are suitable both for supplying a single, larger facility and for installations serving several buildings or larger-scale irrigation systems. The 6" SPINOX 17-10 submersible pump (5.5 kW, 400 V) with an IPRO water-cooled motor is individually selected to match the parameters of the specific well – its depth, diameter, and required capacity.
The 6" SPINOX pump does not treat water and does not certify that it is suitable for human
consumption. If the water is to be used for drinking, cooking, or other household purposes,
an appropriate water treatment system and water quality monitoring at the point of use must
be provided.
Features, description, and technical specifications
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump in which all
key structural components – the suction and discharge ports, housing, shaft, impeller, and
diffuser – are made of AISI 304 stainless steel. This construction provides increased
resistance to wear and a long service life when operating in contact with raw water, which may
contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR arrangement.
The pump is factory-fitted with a check valve to prevent water from flowing back through the
discharge pipe after the pump stops.
The pump is driven by an IPRO WMC water-filled motor. The power cable length is selected
for the specific device variant and well depth. The pump operates continuously,
in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C
and insulation class F.
- Device type: multistage submersible pump
- Motor brand: IPRO (WMC water-filled motor)
- Model: 6" SPINOX 17-10
- Motor power: 5.5 kW
- Power supply: 400 V
- Motor construction: water-filled
- Unit diameter: 131 mm (with 4" motor) / 145 mm (with 6" motor)
- Minimum well diameter: 160 mm
- Materials: suction/discharge ports, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
- Motor speed: 2850 rpm
- Max. pumped liquid temperature: 35°C
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical / horizontal
- Built-in check valve: yes
Technical specifications may vary depending on the production batch – before installation, we recommend checking the device's rating plate.
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" SPINOX submersible pump with an IPRO water-filled motor
What is the 6" SPINOX submersible pump with an IPRO water-filled motor used for?
The 6" SPINOX with an IPRO water-filled motor is a multistage submersible pump designed to draw
and pump raw/untreated water from large-diameter drilled deep wells before treatment – including
for supplying multi-family buildings, farms, and water supply and fire protection systems.
How do I choose the right 6" SPINOX model for my well?
Choosing a model depends on the depth and diameter of the well and the required system flow rate –
the series includes several hydraulic subcategories with different maximum flow rates and power ratings.
Which motors are available for the 6" SPINOX submersible pump?
The 6" SPINOX hydraulic section can be paired with a 4" or 6" motor, depending on the
model: an IPRO WMC water-filled motor, an IPRO IOM oil-filled motor, or an oil-filled
motor from the Italian brand IBO Italy. The specific option (motor type and diameter) is indicated
in the product name.
How can I protect the 6" SPINOX pump from running dry?
The pump can be used with dry-run protection that works without
installing additional probes or sensors directly in the well, simplifying
installation compared to solutions that require separate sensor wiring.
Where can I buy a 6" SPINOX submersible pump manufactured by Dambat?
Dambat does not sell directly. The 6" SPINOX pump is available from our
sales partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SPINOX pump with an IPRO water-filled motor?
IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.
