6" SD 30-13 – submersible pump
The IBO 6" SD submersible pump is a multistage design with increased resistance to sand, intended for drawing and pumping raw water in single- and multi-family homes, farms, and industrial systems. The grey cast-iron body and AISI 304 stainless steel components ensure durable operation in deep wells, while the floating impellers reduce the effects of periodic sand contamination in the water.
Who it is for
-
Farms and large irrigation systems – the high hydraulic capacity makes it possible to supply extensive irrigation systems and drip lines.
-
Multi-family buildings and facilities with high water demand – the wide power range within the series allows the model to be selected according to the scale of the installation.
-
Industrial plants and drainage systems – the design with increased resistance to sand performs well during continuous operation and with varying water quality.
-
Installers and drilling companies – the two-part construction, with the motor and hydraulic section supplied separately, facilitates transport and installation in deep wells.
Applications
The 6" SD series is intended for drawing and pumping technically clean raw water from drilled deep-water intakes for single- and multi-family homes, farms, irrigation systems, and industrial and drainage installations. The design with increased resistance to sand tolerates water containing up to 5% sand. The pump is not a water-treatment device – when using it for other purposes, we recommend ensuring appropriate water preparation.
The pumps operate in a vertical position, in wells with a minimum internal diameter of 160 mm, at a maximum pumped-water temperature of 35°C. The 6" SD 400 V submersible pump works with standard pressure tanks and pressure-control equipment selected according to the scale of the installation.
Features of the 6" SD series
IBO 6" SD series pumps share a common multistage design and identical construction materials regardless of the model. The individual variants differ only in their operating point on the common performance curve – from smaller, lower-power models to high-capacity variants intended for agricultural and industrial applications.
The thermal protection built into the motor winding protects the drive against overload, while the motor’s oil cooling ensures stable operation in continuous-duty mode.
- Pump type: multistage, submersible, with increased resistance to sand
- Diameter: 146 mm (6")
- Minimum well diameter: 160 mm
- Power supply: 400 V (3-phase)
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical
- Maximum liquid temperature: 35°C
- Maximum immersion depth: 100 m
- Rotational speed: 2850 rpm
- Materials: suction/discharge body – grey cast iron, housing/shaft/rotor – AISI 304 stainless steel, impeller and diffuser – PPO polymer, mechanical seal – SiC/SiC/NBR
IBO – 24 months (2 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certificates.
Frequently asked questions (FAQ) – IBO 6" SD submersible pump
What type of well is the 6" SD submersible pump suitable for?
The pump is intended for wells with a minimum internal diameter of 160 mm. Before purchasing, it is worth checking the actual diameter of the borehole to avoid installation problems or motor overheating in an enclosure that is too tight.
How do I choose a pump from the 6" SD series?
The choice depends on the well depth and the amount of water needed at the same time – the models differ in head and capacity, from small domestic installations to large agricultural or industrial requirements. If in doubt, we encourage you to contact the technical department.
Can the 6" SD pump handle sandy water?
Yes – the series has increased resistance to sand, up to a content of 5%; however, regularly pumping sandy water still shortens the service life of the working components.
Does installing the 6" SD pump require a professional?
Installation and electrical connection should be carried out by a person with the appropriate qualifications – the pump is a three-phase device supplied in two parts, and improper installation may damage the motor or cable.
Where can I buy the IBO 6" SD submersible pump?
Dambat does not sell directly. 6" SD series pumps are available from commercial partners, installation wholesalers, and authorized online distributors.
What warranty terms apply to the 6" SD pump?
IBO – 24 months (2 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
