6" IPRO 32-150 (11 kW, 400 V) – submersible pump
The 6" IPRO submersible pump is a multistage design with enhanced sand resistance, intended to supply water to farms, local water supply systems and industrial facilities. AISI 304 stainless steel components ensure durable operation in deep wells, while floating impellers reduce the effects of periodically sandy water and extend the service life of the unit.
Who is it for?
-
Farms and orchards – the high performance of the 6" IPRO series enables the supply of extensive irrigation systems and the filling of tanks over larger areas.
-
Local water supplies and collective systems – the series’ wide range of heads makes it possible to select a model suited to the individual requirements of the system.
-
Industrial plants and fire protection systems – continuous operation and enhanced sand resistance are suitable for drawing process water and for fire protection systems.
-
Livestock farms and animal facilities – an efficient pump from the 6" IPRO series meets the constant, high demand for water for watering animals and servicing livestock buildings.
Application
The 6" IPRO series is intended for drawing clean water from drilled deep-water wells for farms, irrigation systems, local water supply systems, industrial facilities and fire protection systems. The enhanced sand-resistant design tolerates water containing up to 5% sand.
The pumps operate in a vertical position, in wells with a minimum diameter of 6", at a maximum pumped water temperature of 35°C. The 6" IPRO 32-150 400 V submersible pump works with standard pressure tanks, pressure control systems and dry-run protection selected according to the well conditions.
Features of the 6" IPRO series – description and technical data
The 6" IPRO series pumps are multistage units with radial impellers and enhanced sand resistance, thanks to floating impellers and wear-resistant materials. The housing, suction and discharge nozzles, and check valve are made of AISI 304 stainless steel, the diffusers are made of PPO polymer, and the motor is oil-cooled and has insulation class F.
All 6" IPRO series pumps share the same multistage design, regardless of the model – the individual variants differ in their operating point on the common performance curve. The wide range of models makes it possible to select the right unit for the system’s capabilities and water demand. The IPRO oil-filled motor can work with an inverter, allowing smooth performance adjustment and limiting pressure surges in the system.
- Pump type: multistage, submersible, with enhanced sand resistance
- Minimum well diameter: 6"
- Power supply: 3~ 400 V / 50 Hz
- Rotational speed: 2850 rpm
- Protection rating: IP68
- Insulation class: F
- Operating mode: continuous
- Installation position: vertical
- Discharge nozzle: 3"
- Maximum immersion depth: 150 m
- Maximum liquid temperature: 35°C
- Maximum number of starts: 30/h
- Permissible sand content: up to 5%
IPRO – 36 months (3 years) of the manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – 6" IPRO submersible pump
What is the 6" IPRO 32-150 submersible pump used for?
The 6" IPRO 32-150 submersible pump is used to draw clean water from drilled deep-water wells for farms, irrigation systems, local water supply systems, industrial facilities and fire protection systems.
What is the difference between the 6" IPRO 20 and 6" IPRO 32 models?
The “20” and “32” designations refer to the hydraulic capacity – the 20 models achieve a greater head at a lower flow rate, while the 32 models provide a higher flow rate at a lower head. Both groups have the same design and materials, and the choice depends on the well parameters and water demand.
How do I select a 6" IPRO series pump for a well?
The model selection depends on the static and dynamic water levels, the required head and the system’s water demand. If in doubt, we encourage you to contact Dambat’s technical department.
Can the 6" IPRO pump handle sandy water?
Yes – the series has enhanced resistance to sand content of up to 5%, but regularly pumping sandy water may shorten the service life of the unit and the system.
Can the 6" IPRO pump motor work with an inverter?
Yes, the IPRO oil-filled motor is designed to work with an inverter. This allows the pump’s performance to be adjusted smoothly and pressure surges in the system to be limited.
Where can I buy a 6" IPRO submersible pump?
Dambat does not sell directly. 6" IPRO series pumps are available from commercial partners, installation wholesalers and authorised online distributors.
What warranty conditions apply to the 6" IPRO pump?
IPRO – 36 months (3 years) of the manufacturer’s warranty. Dambat provides warranty and post-warranty service.
