6" AP6 L4 – 400 V multistage submersible pump with a 4" IBO ITALY motor
The IBO ITALY 6" AP6 L4 submersible pump is a multistage design made entirely of stainless steel. It is intended for large water supply, industrial, firefighting, and irrigation systems. The ability to operate in a horizontal position and the built-in check valve increase installation flexibility and reliability.
Who is it for?
-
Multi-family buildings and larger water supply systems – the series’ wide range of power and capacity makes it possible to select a model suited to the required water demand.
-
Farms with high water demand – higher-powered models supply extensive irrigation systems, sprinklers, and drip lines.
-
Industrial plants and firefighting systems – the entirely stainless-steel construction and wide power range are suitable for demanding continuous-operation systems.
-
Installers and system designers – the option to select a cable in 5 m increments and the appropriate motor diameter makes it easier to adapt the pump to a specific borehole.
Application
The 6" AP6 L4 pump is designed to draw water from deep intakes for single-family and multi-family homes, farms, irrigation systems, firefighting systems, industrial applications, and drainage.
The pump can operate vertically or horizontally in wells with a minimum internal diameter of 180 mm, at a maximum pumped-water temperature of 35°C. The 6" AP6 L4 400 V submersible pump is compatible with standard hydrophore tanks and pressure-control systems selected according to the scale of the installation.
Features of the 6" AP6 L4 pump
The 6" AP6 pump is made entirely of stainless steel, with increased resistance to sand and a built-in check valve that limits water backflow from the system when the pump is switched off. Lower-power motors have a diameter of 4", while 6" motors are used at higher power ratings.
The thermal protection built into the motor winding protects the drive from overload, while the power cable can be selected in 5 m increments, allowing its length to be adapted to the well depth.
- ว Pump type: multistage, submersible, made entirely of stainless steel
- Minimum well diameter: 180 mm
- Power supply: 400 V (three-phase)
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Maximum liquid temperature: 35°C
- Maximum number of starts per hour: 30
- Power cable: 1.5 m (longer cable available in 5 m increments)
- Rotational speed: 2850 rpm
- Motor diameter: 4" or 6", depending on power
- Additional features: built-in check valve, increased resistance to sand
- Available motors: IBO Italy
IBO ITALY – 36-month (3-year) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certificates.
Frequently asked questions (FAQ) – 6" AP6 L4 submersible pump
Which well is the 6" AP6 L4 pump suitable for?
The pump is designed for wells with a minimum internal diameter of 180 mm.
What distinguishes the 6" AP6 L4 pump?
The pump has a built-in check valve that limits water backflow from the system, as well as increased resistance to sand. It can operate both vertically and horizontally, increasing installation flexibility.
How does the 6" AP6 series differ from FP4?
Both lines belong to the IBO ITALY brand and are made of stainless steel, but they differ in intended use – the 6" AP6 requires wider wells (minimum 180 mm) and includes higher-power models, while FP4 fits narrower boreholes (minimum 115 mm) and is also available in a 230 V version.
How do I select the right 6" AP6 pump model for my needs?
The choice of model depends on the well depth and the amount of water needed simultaneously – the series includes a wide range of variants with different power ratings, delivery heads, and capacities. If in doubt, we encourage you to contact the technical department.
Where can I buy a 6" AP6 series submersible pump?
Dambat does not sell directly. The 6" AP6 pump is available from trade partners, installation wholesalers, and authorized online distributors.
What warranty terms apply to 6" AP6 series pumps?
IBO ITALY – 36-month (3-year) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
