6" AP6 H19 – multistage submersible pump 400 V
6" AP6 H19 submersible pump IBO ITALY is a multi-stage structure made entirely of steel
stainless steel. Destined
is for large water supply, industrial and fire protection installations
irrigation. The ability to work in a horizontal position and the built-in non-return valve increase
flexibility and reliability of installation.
For whom
-
Multi-family buildings and larger water supply installations – a wide range of power and efficiency in the series allows you to select a model to suit your water needs.
-
Agricultural farms with high water demand – higher models are powered by extensive irrigation systems, sprinklers and drip lines.
-
Industrial plants and fire protection installations – all-stainless steel construction and a wide power range are suitable for demanding installations of continuous operation.
-
Installers and installation designers – the ability to select a cable in multiples of 5 m and the appropriate motor diameter makes it easier to match the pump to a specific well.
Application
The 6" AP6 pump is intended for drawing water from deep intakes for single-family houses.
and multi-family houses, farms, irrigation systems, fire protection installations,
industry and drainage.
The pump operates in a vertical or horizontal position, in wells with a minimum diameter
internal diameter 180 mm, with a maximum temperature of pumped water up to 35°C. Submersible pump
6" AP6 400 V works with standard hydrophore tanks and pressure automation
matched to the scale of the installation.
Features of the 6" AP6 pump
The 6" AP6 pump is made entirely of stainless steel, with increased resistance to sand.
and a built-in check valve limiting the return of water from the installation after turning off
pumps. Lower power engines have a diameter of 4", and for higher power they are used
6" engines
Thermal protection built into the motor winding protects the drive against overload,
and the power cable can be selected in multiples of 5 m, adjusting its length to
well depth.
- Pump type: multi-stage, deep-seat, entirely made of stainless steel
- Minimum well diameter: 180mm
- Power supply: 400V (three-phase)
- Insulation class: F
- Degree of protection: IP68
- Working mode: continuous
- Working position: vertical or horizontal
- Max. liquid temperature: 35°C
- Max. number of starts per hour: 30
- Power cable: 1.5 m (possibility to select a longer cable in multiples of 5 m)
- Rotational speed: 2850 rpm
- Motor Diameter: 4" or 6", depending on power
- Additionally: built-in non-return valve, increased sand resistance
- Available engines: IBO Italy
IBO ITALY – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – 6" AP6 submersible pump
Which well is the 6" AP6 pump suitable for?
The pump is designed for wells with a minimum internal diameter of 180 mm.
What makes the 6" AP6 pump unique?
The pump has a built-in check valve that limits the return of water from the installation and the elevated level
sand resistance. It can work in both vertical and horizontal position
increases installation flexibility.
What is the difference between 6" AP6 and FP4?
Both lines belong to the brand IBO ITALY and are made of stainless steel, they differ
however, intended use - 6" AP6 requires wider wells (min. 180 mm) and includes models
with higher power, while FP4 fits narrower holes (min. 115 mm) and is available
is also available in a 230 V version.
How to choose the 6" AP6 pump model for my needs?
The choice of model depends on the depth of the well and the amount of water needed at the same time - series
covers a wide range of variants with different power, lifting height and efficiency.
If in doubt, we encourage you to contact the technical department.
Where can you buy a 6" AP6 submersible pump?
Dambat does not sell directly. The 6" AP6 pump is available from partners
commercial stores, installation wholesalers and authorized online distributors.
What warranty conditions apply to the 6" AP6 pump?
IBO ITALY – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service
Dambat assures.
