6" AP6 H8 – multistage 400 V submersible pump
The IBO ITALY 6" AP6 H8 submersible pump is a multistage design made entirely of stainless steel. It is intended for large water supply, industrial, fire protection, and irrigation systems. The ability to operate in a horizontal position and the built-in check valve increase installation flexibility and reliability.
Who is it for?
-
Multi-family buildings and larger water supply systems – the series’ wide range of power and capacity makes it possible to select a model suited to the scale of water demand.
-
Farms with high water demand – the higher-powered models supply extensive irrigation systems, sprinklers, and drip lines.
-
Industrial plants and fire protection systems – the fully stainless-steel construction and wide power range are suitable for demanding continuous-operation installations.
-
Installers and system designers – the option to select a cable in 5 m increments and the appropriate motor diameter make it easier to adapt the pump to a specific borehole.
Application
The 6" AP6 H8 pump is designed to draw water from deep water intakes for single-family and multi-family homes, farms, irrigation systems, fire protection systems, industrial applications, and dewatering.
The pump can operate vertically or horizontally in wells with a minimum internal diameter of 180 mm, at a maximum pumped-water temperature of 35°C. The 6" AP6 H8 400 V submersible pump is compatible with standard pressure tanks and pressure-control equipment selected for the scale of the installation.
Features of the 6" AP6 H8 pump
The 6" AP6 pump is made entirely of stainless steel, with increased resistance to sand and a built-in check valve that limits the return of water from the system when the pump is switched off. Lower-power motors have a diameter of 4", while 6" motors are used for higher power ratings.
The thermal protection built into the motor winding protects the drive from overload, while the power cable can be selected in 5 m increments, allowing its length to be matched to the well depth.
- Pump type: multistage, submersible, made entirely of stainless steel
- Minimum well diameter: 180 mm
- Power supply: 400 V (three-phase)
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Max. liquid temperature: 35°C
- Max. number of starts per hour: 30
- Power cable: 1.5 m (longer cable available in 5 m increments)
- Rotational speed: 2850 rpm
- Motor diameter: 4" or 6", depending on power
- Additional features: built-in check valve, increased resistance to sand
- Available motors: IBO Italy
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 6" AP6 H8 submersible pump
Which well is the 6" AP6 H8 pump suitable for?
The pump is designed for wells with a minimum internal diameter of 180 mm.
What distinguishes the 6" AP6 H8 pump?
The pump has a built-in check valve that limits the return of water from the system, as well as increased resistance to sand. It can operate both vertically and horizontally, which increases installation flexibility.
How does the 6" AP6 series differ from FP4?
Both lines belong to the IBO ITALY brand and are made of stainless steel, but they differ in their intended applications – the 6" AP6 requires wider wells (min. 180 mm) and includes higher-power models, while FP4 fits narrower boreholes (min. 115 mm) and is also available in a 230 V version.
How do I select the right 6" AP6 pump model for my needs?
The choice of model depends on the well depth and the amount of water needed at the same time – the series includes a wide range of variants with different power ratings, delivery heads, and capacities. If you have any questions, we encourage you to contact the technical department.
Where can I buy a 6" AP6 series submersible pump?
Dambat does not sell directly to consumers. The 6" AP6 pump is available from commercial partners, installation wholesalers, and authorized online distributors.
What warranty terms apply to pumps in the 6" AP6 series?
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
