6" AP6 H3 – multistage 400 V submersible pump with a 4" IBO ITALY motor
The IBO ITALY 6" AP6 H3 submersible pump is a multistage design made entirely of stainless steel. It is intended for large water supply, industrial, fire protection, and irrigation systems. The ability to operate in a horizontal position and the built-in check valve increase the flexibility and reliability of the installation.
Who is it for?
-
Multifamily buildings and larger water supply systems – the wide range of power and capacity available in the series makes it possible to select a model suited to the scale of water demand.
-
Farms with high water demand – higher-output models supply extensive irrigation systems, sprinklers, and drip lines.
-
Industrial plants and fire protection systems – the all-stainless-steel construction and wide power range are suitable for demanding continuous-duty installations.
-
Installers and system designers – the option to select a cable in 5 m increments and the appropriate motor diameter make it easier to adapt the pump to a specific borehole.
Applications
The 6" AP6 H3 pump is designed to draw water from deep water intakes for single-family and multifamily homes, farms, irrigation systems, fire protection systems, industry, and drainage applications.
The pump can operate in a vertical or horizontal position, in wells with a minimum internal diameter of 180 mm, at a maximum pumped-water temperature of 35°C. The 6" AP6 H3 400 V submersible pump works with standard pressure tanks and pressure-control systems selected according to the scale of the installation.
Features of the 6" AP6 H3 pump
The 6" AP6 pump is made entirely of stainless steel, with increased resistance to sand and a built-in check valve that limits water backflow from the system after the pump is switched off. Lower-power motors have a diameter of 4", while 6" motors are used for higher power ratings.
The thermal protection built into the motor winding protects the drive against overload, while the power cable can be selected in 5 m increments, allowing its length to be matched to the well depth.
- Pump type: multistage, submersible, entirely made of stainless steel
- Minimum well diameter: 180 mm
- Power supply: 400 V (three-phase)
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Maximum liquid temperature: 35°C
- Maximum number of starts per hour: 30
- Power cable: 1.5 m (a longer cable can be selected in 5 m increments)
- Rotational speed: 2850 rpm
- Motor diameter: 4" or 6", depending on power
- Additional features: built-in check valve, increased resistance to sand
- Available motors: IBO Italy
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certificates.
Frequently Asked Questions (FAQ) – 6" AP6 H3 submersible pump
Which well is the 6" AP6 H3 pump suitable for?
The pump is designed for wells with a minimum internal diameter of 180 mm.
What makes the 6" AP6 H3 pump stand out?
The pump has a built-in check valve that limits water backflow from the system, as well as increased resistance to sand. It can operate in both vertical and horizontal positions, which increases installation flexibility.
What is the difference between the 6" AP6 and FP4 series?
Both lines belong to the IBO ITALY brand and are made of stainless steel, but they differ in their intended applications – the 6" AP6 requires wider wells (min. 180 mm) and includes higher-power models, while the FP4 fits narrower boreholes (min. 115 mm) and is also available in a 230 V version.
How do I select the right 6" AP6 pump model for my needs?
The choice of model depends on the well depth and the amount of water required simultaneously – the series includes a wide range of variants with different power ratings, heads, and capacities. If you have any doubts, we encourage you to contact the technical department.
Where can I buy a 6" AP6 series submersible pump?
Dambat does not sell directly. The 6" AP6 pump is available from trade partners, installation wholesalers, and authorized online distributors.
What warranty terms apply to pumps in the 6" AP6 series?
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
