6" AP6 F3 – multistage 400 V submersible pump with a 4" IBO ITALY motor
The 6" AP6 F3 submersible pump from IBO ITALY is a multistage design made entirely of stainless steel. It is intended for large water supply, industrial, fire protection, and irrigation systems. The ability to operate in a horizontal position and the built-in check valve increase installation flexibility and reliability.
Who is it for?
-
Multi-family buildings and larger water supply systems – the wide range of power and performance available in the series makes it possible to select a model suited to the scale of water demand.
-
Farms with high water demand – higher-output models supply extensive irrigation systems, sprinklers, and drip lines.
-
Industrial plants and fire protection systems – the all-stainless-steel construction and wide power range are suitable for demanding continuous-duty installations.
-
Installers and system designers – the ability to select a cable in 5 m increments and choose the appropriate motor diameter makes it easier to adapt the pump to a specific borehole.
Applications
The 6" AP6 F3 pump is designed for drawing water from deep intakes for single-family and multi-family homes, farms, irrigation systems, fire protection systems, industrial applications, and drainage.
The pump operates in a vertical or horizontal position, in wells with a minimum internal diameter of 180 mm, at a maximum pumped-water temperature of 35°C. The 6" AP6 F3 400 V submersible pump works with standard pressure tanks and pressure control systems selected according to the scale of the installation.
Features of the 6" AP6 F3 pump
The 6" AP6 pump is made entirely of stainless steel, with increased resistance to sand and a built-in check valve that limits water backflow from the system after the pump is switched off. Lower-power motors have a diameter of 4", while 6" motors are used for higher power ratings.
The thermal protection built into the motor winding protects the drive against overload, while the power cable can be selected in 5 m increments, allowing its length to be matched to the well depth.
- Pump type: multistage, submersible, entirely made of stainless steel
- Minimum well diameter: 180 mm
- Power supply: 400 V (three-phase)
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Maximum liquid temperature: 35°C
- Maximum number of starts per hour: 30
- Power cable: 1.5 m (a longer cable can be selected in 5 m increments)
- Rotational speed: 2850 rpm
- Motor diameter: 4" or 6", depending on the power rating
- Additional features: built-in check valve, increased resistance to sand
- Available motors: IBO Italy
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certificates.
Frequently asked questions (FAQ) – 6" AP6 F3 submersible pump
What type of well is the 6" AP6 F3 pump suitable for?
The pump is designed for wells with a minimum internal diameter of 180 mm.
What makes the 6" AP6 F3 pump stand out?
The pump has a built-in check valve that limits water backflow from the system, as well as increased resistance to sand. It can operate in both vertical and horizontal positions, increasing installation flexibility.
How does the 6" AP6 series differ from FP4?
Both lines belong to the IBO ITALY brand and are made of stainless steel, but they differ in their intended applications – the 6" AP6 requires wider wells (min. 180 mm) and includes higher-power models, while FP4 fits narrower boreholes (min. 115 mm) and is also available in a 230 V version.
How do I choose the right 6" AP6 pump model for my needs?
The choice of model depends on the well depth and the amount of water needed at the same time – the series includes a wide range of variants with different power ratings, heads, and flow rates. If you have any doubts, we encourage you to contact the technical department.
Where can I buy a 6" AP6 series submersible pump?
Dambat does not sell directly. The 6" AP6 pump is available from commercial partners, installation wholesalers, and authorized online distributors.
What warranty conditions apply to 6" AP6 series pumps?
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
