6" AP6 F14 – 400 V multistage submersible pump
The IBO ITALY 6" AP6 F14 submersible pump is a multistage design made entirely of stainless steel.
stainless steel. It is designed
is designed for large water-supply, industrial, and fire-protection installations, as well as
irrigation systems. The option to operate horizontally and the built-in check valve increase
flexibility and reliability of the installation.
For whom
-
Multifamily buildings and larger water-supply installations – the series' wide range of power and capacity makes it possible to select a model suited to the scale of water demand.
-
Farms with high water demand – higher-capacity models supply extensive irrigation systems, sprinklers, and drip lines.
-
Industrial plants and fire-protection installations – the entirely stainless-steel construction and wide power range are suitable for demanding continuous-operation systems.
-
Installers and installation designers – the option to select the cable in 5 m increments and choose the appropriate motor diameter makes it easier to adapt the pump to a specific borehole.
Applications
The 6" AP6 F14 pump is designed to draw water from deep sources for single-
and multifamily homes, farms, irrigation systems, fire-protection installations,
industry and drainage systems.
The pump operates vertically or horizontally, in wells with a minimum diameter
of 180 mm, at a maximum pumped-water temperature of 35°C. The submersible pump
The 6" AP6 F14 400 V works with standard pressure tanks and pressure-control systems
selected to match the scale of the installation.
Features of the 6" AP6 F14 pump
The 6" AP6 pump is made entirely of stainless steel, with increased resistance to sand
and a built-in check valve limiting water backflow from the system after shutdown
pumps. Lower-power motors have a diameter of 4", while higher-power models use
6" motors.
Thermal protection built into the motor winding protects the drive against overload,
and the power cable can be selected in 5 m increments, matching its length to
well depth.
- Pump type: multistage, submersible, entirely made of stainless steel
- Minimum well diameter: 180 mm
- Power supply: 400 V (three-phase)
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Max. liquid temperature: 35°C
- Max. number of starts per hour: 30
- Power cable: 1.5 m (longer cable available in multiples of 5 m)
- Rotational speed: 2850 rpm
- Motor diameter: 4" or 6", depending on power
- Additionally: built-in check valve, enhanced sand resistance
- Available motors: IBO Italy
IBO ITALY – 36 months (3 years) of manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently Asked Questions (FAQ) – 6" AP6 F14 submersible pump
What type of well is the 6" AP6 F14 pump suitable for?
The pump is intended for wells with a minimum internal diameter of 180 mm.
What distinguishes the 6" AP6 F14 pump?
The pump has a built-in check valve that limits water backflow from the system, as well as enhanced
sand resistance. It can operate both vertically and horizontally, which
increases installation flexibility.
What is the difference between the 6" AP6 and FP4 series?
Both lines belong to the IBO ITALY brand and are made of stainless steel; they differ
however, in terms of intended use – the 6" AP6 requires wider wells (min. 180 mm) and includes models
with higher power, while FP4 is suitable for narrower boreholes (min. 115 mm) and is available
is also available in a 230 V version.
How do I choose the right 6" AP6 pump model for my needs?
The choice of model depends on the well depth and the amount of water needed at the same time – the series
covers a wide range of variants with different power ratings, head heights, and capacities.
If in doubt, we encourage you to contact the technical department.
Where can I buy a 6" AP6 series submersible pump?
Dambat does not sell directly. The 6" AP6 pump is available from partners
commercial outlets, installation wholesalers, and authorized online distributors.
What warranty terms apply to the 6" AP6 series pumps?
IBO ITALY – 36 months (3 years) of manufacturer’s warranty. Warranty and post-warranty service
provided by Dambat.
