6" AP6 F10 – 400 V multistage submersible pump
The 6" AP6 F10 submersible pump by IBO ITALY is a multistage construction made entirely of stainless steel. It is designed for large water supply, industrial, fire protection, and irrigation systems. The ability to operate in a horizontal position and the built-in check valve increase installation flexibility and reliability.
Who is it for?
-
Multi-family buildings and larger water supply systems – the wide range of power and performance available in the series makes it possible to select a model suited to the scale of water demand.
-
Farms with high water demand – higher-powered models supply extensive irrigation systems, sprinklers, and drip lines.
-
Industrial plants and fire protection systems – the all-stainless-steel construction and wide power range are suitable for demanding continuous-duty installations.
-
Installers and system designers – the option to select a cable in 5 m increments and the appropriate motor diameter make it easier to match the pump to a specific borehole.
Applications
The 6" AP6 F10 pump is designed to draw water from deep sources for single-family and multi-family homes, farms, irrigation systems, fire protection systems, industrial applications, and drainage.
The pump can operate vertically or horizontally in wells with a minimum internal diameter of 180 mm, at a maximum pumped-water temperature of 35°C. The 6" AP6 F10 400 V submersible pump is compatible with standard pressure tanks and pressure-control equipment selected according to the scale of the installation.
Features of the 6" AP6 F10 pump
The 6" AP6 pump is made entirely of stainless steel, with increased resistance to sand and a built-in check valve that limits water flow back from the system after the pump is switched off. Lower-powered motors have a diameter of 4", while 6" motors are used at higher power ratings.
The thermal protection built into the motor winding protects the drive against overload, while the power cable can be selected in 5 m increments, allowing its length to be matched to the well depth.
- Pump type: multistage, submersible, made entirely of stainless steel
- Minimum well diameter: 180 mm
- Power supply: 400 V (three-phase)
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Maximum liquid temperature: 35°C
- Maximum number of starts per hour: 30
- Power cable: 1.5 m (longer cable available in 5 m increments)
- Rotational speed: 2850 rpm
- Motor diameter: 4" or 6", depending on power
- Additional features: built-in check valve, increased resistance to sand
- Available motors: IBO Italy
IBO ITALY – 36 months (3 years) of manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certificates.
Frequently Asked Questions (FAQ) – 6" AP6 F10 submersible pump
What type of well is the 6" AP6 F10 pump suitable for?
The pump is designed for wells with a minimum internal diameter of 180 mm.
What distinguishes the 6" AP6 F10 pump?
The pump has a built-in check valve that limits water flow back from the system, as well as increased resistance to sand. It can operate both vertically and horizontally, increasing installation flexibility.
How does the 6" AP6 series differ from FP4?
Both lines belong to the IBO ITALY brand and are made of stainless steel, but they differ in intended use – the 6" AP6 requires wider wells (min. 180 mm) and includes higher-powered models, while FP4 fits narrower boreholes (min. 115 mm) and is also available in a 230 V version.
How do I choose a 6" AP6 pump model to suit my needs?
The choice of model depends on the well depth and the amount of water needed at the same time – the series includes a wide range of variants with different power ratings, pumping heights, and capacities. If in doubt, we encourage you to contact the technical department.
Where can I buy a 6" AP6 series submersible pump?
Dambat does not sell directly. The 6" AP6 pump is available from commercial partners, installation wholesalers, and authorized online distributors.
What warranty terms apply to 6" AP6 series pumps?
IBO ITALY – 36 months (3 years) of manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
