6" AP6 E4 – multistage 400 V deep-well pump with 4" IBO ITALY motor
The IBO ITALY 6" AP6 E4 deep-well pump is a multistage design made entirely of stainless steel. It is intended for large water supply, industrial, fire protection, and irrigation systems. The ability to operate in a horizontal position and the built-in check valve increase installation flexibility and reliability.
Who is it for?
-
Multi-family buildings and larger water supply systems – the wide range of power and performance available in the series makes it possible to select a model suited to the scale of water demand.
-
Farms with high water demand – higher-powered models supply extensive irrigation systems, sprinklers, and drip lines.
-
Industrial facilities and fire protection systems – the all-stainless-steel construction and wide power range perform well in demanding continuous-operation installations.
-
Installers and system designers – the option to select a cable in 5 m increments and the appropriate motor diameter make it easier to adapt the pump to a specific borehole.
Application
The 6" AP6 E4 pump is designed to draw water from deep intakes for single-family and multi-family homes, farms, irrigation systems, fire protection systems, industry, and drainage.
The pump can operate vertically or horizontally in wells with a minimum internal diameter of 180 mm, at a maximum pumped-water temperature of 35°C. The 6" AP6 E4 400 V deep-well pump works with standard pressure tanks and pressure-control systems selected according to the scale of the installation.
Features of the 6" AP6 E4 pump
The 6" AP6 pump is made entirely of stainless steel, with increased sand resistance and a built-in check valve that limits water backflow from the system after the pump is switched off. Lower-power motors have a diameter of 4", while 6" motors are used for higher power ratings.
Thermal protection built into the motor winding protects the drive from overload, while the power cable can be selected in 5 m increments, allowing its length to be matched to the well depth.
- Pump type: multistage, deep-well, entirely made of stainless steel
- Minimum well diameter: 180 mm
- Power supply: 400 V (three-phase)
- Insulation class: F
- Ingress protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Max. liquid temperature: 35°C
- Max. number of starts per hour: 30
- Power cable: 1.5 m (option to select a longer cable in 5 m increments)
- Rotational speed: 2850 rpm
- Motor diameter: 4" or 6", depending on power
- Additional features: built-in check valve, increased sand resistance
- Available motors: IBO Italy
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and water-management equipment with quality certificates.
Frequently asked questions (FAQ) – 6" AP6 deep-well pump
What type of well is the 6" AP6 E4 pump suitable for?
The pump is designed for wells with a minimum internal diameter of 180 mm.
What distinguishes the 6" AP6 E4 pump?
The pump has a built-in check valve that limits water backflow from the system, as well as increased sand resistance. It can operate both vertically and horizontally, increasing installation flexibility.
How does the 6" AP6 series differ from FP4?
Both lines belong to the IBO ITALY brand and are made of stainless steel, but they differ in intended use – the 6" AP6 requires wider wells (min. 180 mm) and includes higher-power models, while FP4 fits narrower boreholes (min. 115 mm) and is also available in a 230 V version.
How do I select the right 6" AP6 pump model for my needs?
The choice of model depends on the well depth and the amount of water required simultaneously – the series includes a wide range of variants with different power ratings, delivery heads, and capacities. If in doubt, we encourage you to contact the technical department.
Where can I buy a 6" AP6 series deep-well pump?
Dambat does not sell directly. The 6" AP6 pump is available from commercial partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to 6" AP6 series pumps?
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
