6" AP6 D9 – multistage 400 V submersible pump
The 6" AP6 D9 submersible pump by IBO ITALY is a multistage design made entirely of stainless
steel. It is designed
for large water supply, industrial, fire protection, and irrigation systems. The ability to operate horizontally and the built-in check valve increase
the flexibility and reliability of the installation.
Who it's for
-
Multi-family buildings and larger water supply systems – the series’ wide range of power and flow rates makes it possible to select a model to match water demand.
-
Farms with high water demand – higher-capacity models supply extensive irrigation systems, sprinklers, and drip lines.
-
Industrial plants and fire protection systems – the all-stainless-steel construction and wide power range make these pumps suitable for demanding continuous-duty installations.
-
Installers and system designers – the ability to select a cable in 5 m increments and choose the appropriate motor diameter makes it easy to match the pump to a specific borehole.
Applications
The 6" AP6 D9 pump is designed to draw water from deep sources for single-
and multi-family homes, farms, irrigation systems, fire protection systems,
industry, and drainage.
The pump operates vertically or horizontally in wells with a minimum internal diameter
of 180 mm, at a maximum pumped water temperature of 35°C. The 6" AP6 D9 400 V submersible pump
works with standard pressure tanks and pressure control systems selected to suit the scale of the installation.
Features of the 6" AP6 D9 pump
The 6" AP6 pump is made entirely of stainless steel, with increased resistance to sand
and a built-in check valve that limits water flowing back from the system after the pump
is switched off. Lower-powered motors have a diameter of 4", while higher-powered models use
6" motors.
Thermal protection built into the motor winding protects the drive from overload,
and the power cable can be selected in 5 m increments to match its length to the
well depth.
- Pump type: multistage, submersible, entirely made of stainless steel
- Minimum well diameter: 180 mm
- Power supply: 400 V (three-phase)
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Max. liquid temperature: 35°C
- Max. number of starts per hour: 30
- Power cable: 1.5 m (a longer cable can be selected in multiples of 5 m)
- Rotational speed: 2850 rpm
- Motor diameter: 4" or 6", depending on power
- Additionally: built-in check valve, enhanced sand resistance
- Available motors: IBO Italy
IBO ITALY – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydroengineering equipment with quality certifications.
Frequently asked questions (FAQ) – 6" AP6 D9 submersible pump
What type of well is the 6" AP6 D9 pump suitable for?
The pump is designed for wells with a minimum internal diameter of 180 mm.
What makes the 6" AP6 D9 pump stand out?
The pump has a built-in check valve that limits water flowing back from the system and enhanced
sand resistance. It can operate in both vertical and horizontal positions,
offering greater installation flexibility.
How does the 6" AP6 series differ from the FP4?
Both product lines are part of the IBO ITALY brand and are made of stainless steel, but they differ
in their intended use – the 6" AP6 requires wider wells (min. 180 mm) and includes models
with higher power ratings, while the FP4 fits narrower boreholes (min. 115 mm) and is also available
in a 230 V version.
How do I choose a 6" AP6 pump model for my needs?
The model you choose depends on the well depth and the amount of water needed at one time – the series
includes a wide range of variants with different power ratings, head heights, and flow rates.
We encourage you to contact our technical department if you have any questions.
Where can I buy a 6" AP6 series submersible pump?
Dambat does not sell directly. The 6" AP6 pump is available from sales partners,
plumbing wholesalers, and authorized online distributors.
What warranty conditions apply to 6" AP6 series pumps?
IBO ITALY – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service
is provided by Dambat.
