6" AP6 B8 – multistage 400 V submersible pump
The IBO ITALY 6" AP6 B8 submersible pump is a multistage construction made entirely of stainless steel.
stainless steel. It is designed
is designed for large water-supply, industrial, and fire protection systems, as well as
irrigation systems. The option of horizontal operation and the built-in check valve increase
flexibility and reliability of the installation.
Who is it for
-
Multifamily buildings and larger water-supply systems – the series’ wide range of power and output makes it possible to select a model suited to the scale of water demand.
-
Farms with high water demand – higher-capacity models supply extensive irrigation systems, sprinklers, and drip lines.
-
Industrial plants and fire protection systems – the entirely stainless-steel construction and wide power range perform well in demanding continuous-operation installations.
-
Installers and system designers – the option to select the cable in 5 m increments and choose the appropriate motor diameter makes it easier to adapt the pump to a specific borehole.
Applications
The 6" AP6 B8 pump is designed to draw water from deep intakes for single-
and multifamily buildings, farms, irrigation systems, fire protection systems,
industry and drainage systems.
The pump operates in a vertical or horizontal position, in wells with a minimum diameter of
an internal diameter of 180 mm, with a maximum pumped water temperature of 35°C. The submersible pump
The 6" AP6 B8 400 V works with standard pressure tanks and pressure-control systems
selected to match the scale of the installation.
Features of the 6" AP6 B8 pump
The 6" AP6 pump is made entirely of stainless steel, with increased resistance to sand
and a built-in check valve limiting the return of water from the system after shutdown
pumps. Lower-power motors have a diameter of 4", while higher-power models use
6" motors.
The thermal protection built into the motor winding protects the drive against overload,
and the power cable can be selected in 5 m increments, matching its length to
well depth.
- Pump type: multistage, submersible, entirely made of stainless steel
- Minimum well diameter: 180 mm
- Power supply: 400 V (three-phase)
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Maximum liquid temperature: 35°C
- Maximum number of starts per hour: 30
- Power cable: 1.5 m (longer cable available in multiples of 5 m)
- Rotational speed: 2850 rpm
- Motor diameter: 4" or 6", depending on power
- Additionally: built-in check valve, enhanced sand resistance
- Available motors: IBO Italy
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently Asked Questions (FAQ) – 6" AP6 B8 submersible pump
What type of well is the 6" AP6 B8 pump suitable for?
The pump is designed for wells with a minimum internal diameter of 180 mm.
What distinguishes the 6" AP6 B8 pump?
The pump has a built-in check valve that limits water backflow from the system and enhanced
sand resistance. It can operate in both vertical and horizontal positions, which
increases installation flexibility.
What is the difference between the 6" AP6 and FP4 series?
Both lines belong to the IBO ITALY brand and are made of stainless steel; they differ
however, in terms of intended use – 6" AP6 requires wider wells (min. 180 mm) and includes models
with higher power, while FP4 fits narrower boreholes (min. 115 mm) and is available
is also available in a 230 V version.
How do I choose the right 6" AP6 pump model for my needs?
The model selection depends on the well depth and the amount of water required at the same time – the series
covers a wide range of variants with different power ratings, pumping heights, and capacities.
If you have any questions, please contact the technical department.
Where can I buy a 6" AP6 series submersible pump?
Dambat does not sell directly. The 6" AP6 pump is available from partners
commercial outlets, installation wholesalers, and authorised online distributors.
What warranty terms apply to pumps in the 6" AP6 series?
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service
provided by Dambat.
