5" SD 32-8 – submersible pump
The IBO 5" SD submersible pump is a multistage design with increased resistance to sand, intended for drawing and pumping raw water in single- and multifamily homes, farms, and industrial installations. The gray cast iron body and AISI 304 stainless steel components ensure durable operation in deep wells, while the floating impellers reduce the effects of periodic sand contamination and extend the service life of the device.
Who it is for
-
Farms and horticultural operations – the hydraulic system’s high performance facilitates supplying irrigation systems, sprinklers, and drip lines across larger areas.
-
Multifamily buildings and facilities with increased water demand – the wide power range within the series makes it possible to select a model suited to the scale of the installation.
-
Industrial plants and drainage installations – the increased resistance to sand is useful with periodically sand-contaminated water and continuous operation.
-
Installers and drilling companies – the two-part design, with the motor and hydraulic section supplied separately, facilitates transport and installation in deep wells.
Applications
The 5" SD series is intended for drawing and pumping clean, technically raw water from drilled deep-water wells for single- and multifamily homes, farms, irrigation systems, and industrial and drainage installations. The design’s increased resistance to sand allows it to handle water containing up to 5% sand. The pump is not a water-treatment device – when using it for other purposes, we recommend ensuring appropriate water treatment.
The pumps operate in a vertical position in wells with a minimum internal diameter of 145 mm, at a maximum pumped-water temperature of 35°C. The 5" SD 400 V submersible pump works with standard hydrophore tanks, pressure-control systems, and dry-run protection selected according to the well conditions.
Features of the 5" SD series
The IBO 5" SD series shares a common multistage design and identical construction materials regardless of the model. The individual variants differ only in their operating point on the shared performance curve – therefore, selecting a model comes down to matching the well parameters and water demand, without changing the installation or operating principles.
The thermal protection built into the motor winding protects the drive against overload, while the motor’s oil cooling ensures stable operation in continuous-duty mode.
- Pump type: multistage, submersible, with increased resistance to sand
- Diameter: 127 mm (5")
- Minimum well diameter: 145 mm
- Power supply: 400 V (3-phase)
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical
- Max. fluid temperature: 35°C
- Max. immersion depth: 100 m
- Rotational speed: 2850 rpm
- Materials: suction/discharge body – gray cast iron, housing/shaft/rotor – AISI 304 stainless steel, impeller and diffuser – PPO polymer, mechanical seal – SiC/SiC/NBR
IBO – 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and water-engineering equipment with quality certifications.
Frequently asked questions (FAQ) – IBO 5" SD submersible pump
How do the 5" SD 20 and 5" SD 32 models differ?
The “20" and “32" designations refer to the hydraulic performance – model 20 pumps achieve a greater head at a lower flow rate, while model 32 pumps provide a higher flow rate at a lower head. The choice depends on the well parameters and water demand, not on the quality of workmanship – both groups have an identical design and materials.
What installations is the 5" SD submersible pump suitable for?
The pump is suitable for drawing and pumping raw water in single- and multifamily homes, farms, irrigation systems, and industrial and drainage installations. It requires a water source with a low level of contamination – the permitted sand content is a maximum of 5%.
How do you select a 5" SD series pump model for a well?
Model selection depends on the depth of the static and dynamic water levels, the required head, and the installation’s water demand. The series includes models with different power ratings and capacities, making it possible to match a pump to both small domestic water sources and larger agricultural or industrial installations. If in doubt, we encourage you to contact the technical department.
Can the 5" SD pump handle sandy water?
Yes – the series has increased resistance to sand at concentrations of up to 5%, but regular pumping of sand-contaminated water may shorten the service life of the device and installation.
Where can you buy the IBO 5" SD submersible pump?
Dambat does not sell directly. Pumps from the 5" SD series are available from trade partners, installation wholesalers, and authorized online distributors.
What warranty terms apply to the 5" SD pump?
IBO – 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
