5" SD 20-14 - submersible pump
The IBO 5" SD submersible pump is a multistage design with increased sand resistance, intended for drawing and pumping untreated water in single- and multi-family homes, farms, and industrial installations. The gray cast-iron casing and AISI 304 stainless steel components ensure durable operation in deep boreholes, while the floating impellers reduce the effects of occasional sand in the water and extend the device's service life.
Who it's for
-
Farms and horticultural operations – high hydraulic capacity makes it easier to supply irrigation systems, sprinklers, and drip lines over larger areas.
-
Multi-family buildings and facilities with high water demand – the series’ broad power range makes it possible to select a model suited to the scale of the installation.
-
Industrial plants and drainage systems – increased sand resistance is suitable for occasional sandy water and continuous operation.
-
Installers and drilling companies – the two-part design, with the motor and hydraulic section supplied separately, makes transport and installation in deep boreholes easier.
Applications
The 5" SD series is designed to draw and pump clean, untreated water from deep drilled wells for single- and multi-family homes, farms, irrigation systems, industrial facilities, and drainage systems. Its design with increased sand resistance tolerates water containing up to 5% sand. The pump does not treat water; if using it for other purposes, we recommend ensuring appropriate water treatment.
The pumps operate vertically in wells with a minimum internal diameter of 145 mm and a maximum pumped water temperature of 35°C. The 5" SD 400 V submersible pump works with standard pressure tanks, pressure control systems, and dry-run protection selected to suit the well conditions.
Features of the 5" SD series
IBO 5" SD series pumps share the same multistage design and identical materials, regardless of model. The variants differ only in their operating point on the shared performance curve, making model selection a matter of matching the well parameters and water demand, with no changes to installation or operating requirements.
The thermal protection built into the motor winding protects the drive from overload, while oil cooling ensures stable continuous operation.
- Pump type: multistage, submersible, with increased sand resistance
- Diameter: 127 mm (5")
- Minimum well diameter: 145 mm
- Power supply: 400 V (3-phase)
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical
- Maximum liquid temperature: 35°C
- Maximum immersion depth: 100 m
- Rotational speed: 2850 rpm
- Materials: suction/discharge casing – grey cast iron, housing/shaft/rotor – AISI 304 stainless steel, impeller and diffuser – PPO polymer, mechanical seal – SiC/SiC/NBR
IBO – 24 months (2 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – IBO 5" SD submersible pump
What is the difference between the 5" SD 20 and 5" SD 32 models?
The “20” and “32” designations refer to the hydraulic performance – model 20 pumps achieve a higher head at a lower flow rate, while model 32 pumps provide a higher flow rate at a lower head. The choice depends on the well parameters and water demand, not on build quality – both groups have identical construction and materials.
What types of installations is the 5" SD submersible pump suitable for?
The pump is suitable for drawing and pumping raw water in single- and multi-family homes, farms, irrigation systems, and industrial and drainage installations. It must be supplied from water sources with low contaminant levels – the maximum permissible sand content is 5%.
How do I choose a 5" SD series pump model for my well?
Model selection depends on the static and dynamic water levels, the required head, and the installation’s water demand. The series includes models with different power ratings and capacities, allowing you to choose a pump for small domestic water sources as well as larger agricultural or industrial installations. W If you have any questions, please contact our technical department.
Can the 5" SD pump handle water containing sand?
Yes – the series has increased resistance to sand, with a maximum sand content of 5%, but regularly pumping sandy water may shorten the service life of the device and installation.
Where can I buy an IBO 5" SD submersible pump?
Dambat does not sell directly. 5" SD series pumps are available from our sales partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 5" SD pump?
IBO – 24 months (2 years) manufacturer’s warranty. Dambat provides warranty and post-warranty service.