4" FP4 Q040 – 400 V multistage submersible pump
The 4" FP4 Q040 submersible pump by IBO ITALY is a multistage Italian design made entirely of stainless steel, intended for drawing and pumping raw water in single- and multi-family homes, farms, and industrial and fire protection systems. DRY RUN PRO technology increases resistance to seizure during dry running, while the option of horizontal or vertical installation provides greater flexibility.
Who it’s for
-
Owners of single- and multi-family homes – the series’ wide range of power and flow rates makes it possible to select a model to suit the well depth and water demand.
-
Farms and horticultural operations – the higher-output models in the series power irrigation systems, sprinklers and drip lines.
-
Industrial and fire protection systems – the all-stainless-steel construction and ability to operate horizontally make it suitable for non-standard installation configurations.
-
Installers – the option to order a cable in a length that is a multiple of 5 m makes it easy to match the cable to the depth of a specific well.
Applications
The 4" FP4 series is designed for drawing and pumping clean raw water from drilled deep-water wells for use in single- and multi-family homes, farms, irrigation systems, fire protection systems, industry and drainage. The design tolerates sand content of up to 185 g/m³. The pump does not treat water – if using it for other purposes, we recommend ensuring appropriate water treatment.
The pumps can operate vertically or horizontally in wells with a minimum internal diameter of 115 mm, at a maximum pumped-water temperature of 35°C. The 4" FP4 230 V / 400 V submersible pump is compatible with standard pressure tanks and pressure control systems.
Features of the 4" FP4 series
The 4" FP4 series pumps are made entirely of AISI 304 stainless steel – the suction and discharge body, housing, shaft and rotor – providing corrosion resistance under typical operating conditions. The impeller and diffuser are made of polymer (PPO), and the mechanical seal uses a SiC/SiC/NBR arrangement. Built-in floating impellers and a check valve that limits water backflow from the installation complete the design.
DRY RUN PRO technology increases the motor’s resistance to seizure in the event of brief dry running. The 230 V version is supplied with a starter box containing a capacitor and overcurrent protection, as well as thermal protection built into the motor winding.
- Pump type: multistage, submersible, entirely made of stainless steel
- Diameter: 98 mm (4")
- Minimum well diameter: 115 mm
- Power supply: 230 V or 400 V
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Maximum liquid temperature: 35°C
- Permissible sand content: up to 185 g/m³
- Maximum number of starts per hour: 30
- Power cable: 1.5 m (longer cables can be selected in 5 m increments)
- Rotational speed: 2850 rpm
- Materials: suction and discharge body, housing, shaft and rotor – AISI 304 stainless steel, impeller and diffuser – PPO polymer, mechanical seal – SiC/SiC/NBR
- Additional features: built-in check valve, floating impellers, DRY RUN PRO technology
IBO ITALY – 36 months (3 years) manufacturer's warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.
Frequently asked questions (FAQ) – 4" FP4 submersible pump
What type of well is the 4" FP4 submersible pump suitable for?
The pump is designed for wells with a minimum internal diameter of 115 mm. Before purchasing, it is worth checking the actual borehole diameter to avoid installation problems or motor overheating.
What makes the 4" FP4 pump stand out?
The pump uses DRY RUN PRO technology, which increases resistance to seizure during brief dry-running, and can be installed in both vertical and horizontal positions. Built-in floating impellers and a check valve further extend the device's service life.
How does the 4" FP4 pump differ from the IBO 4" SD pump?
Both series have similar applications and diameters, but differ in body material – the 4" FP4 has a suction and discharge body made entirely of stainless steel, while the 4" SD uses brass for this component. The choice also depends on whether horizontal installation is required, which is available only for the 4" FP4 series.
How do I choose a 4" FP4 pump model to suit my needs?
Choosing a model depends on the well depth and the amount of water needed at one time – the series includes a wide range of models with different delivery heights and flow rates, from modest household needs to larger agricultural and industrial installations. When in doubt, we encourage you to contact our technical department.
Where can I buy a 4" FP4 submersible pump?
Dambat does not sell directly. 4" FP4 series pumps are available from sales partners, plumbing wholesalers, and authorized online distributors.
What are the warranty terms for the 4" FP4 pump?
IBO ITALY – 36 months (3 years) manufacturer's warranty. Dambat provides warranty and post-warranty service.
