Description
4" FP4 D030 – 230 V multistage submersible pump
The 4" FP4 D030 submersible pump from IBO ITALY is a multistage Italian design made entirely of stainless steel, intended for drawing and pumping raw water in single- and multi-family homes, farms, and industrial and fire protection systems. DRY RUN PRO technology increases resistance to seizure in the event of dry running, while the option of horizontal or vertical installation increases installation flexibility.
Who it is for
- Owners of single- and multi-family homes – the series’ wide range of power and capacity makes it possible to select a model suited to the well depth and water demand.
- Farms and horticultural operations – the higher-output models in the series supply irrigation systems, sprinklers, and drip lines.
- Industrial and fire protection systems – the all-stainless-steel construction and option of horizontal operation are suitable for non-standard installation layouts.
- Installers – the option of ordering a cable with a length selected in 5 m increments makes it easier to match the pump to the depth of a specific well.
Applications
The 4" FP4 series is intended for drawing and pumping technically clean raw water from drilled deep-water wells for single- and multi-family homes, farms, irrigation systems, fire protection systems, industrial applications, and drainage. The construction tolerates sand content of up to 185 g/m³. The pump is not a water treatment device – when using it for other purposes, we recommend ensuring appropriate water treatment.
The pumps can operate vertically or horizontally, in wells with a minimum internal diameter of 115 mm, at a maximum pumped-water temperature of 35°C. The 4" FP4 230 V / 400 V submersible pump works with standard pressure tanks and pressure-control systems.
Features of the 4" FP4 series
The 4" FP4 series pumps are made entirely of AISI 304 stainless steel – the suction and discharge body, housing, shaft, and rotor – providing corrosion resistance under typical operating conditions. The impeller and diffuser are made of polymer (PPO), while the mechanical seal uses a SiC/SiC/NBR configuration. Built-in floating impellers and a check valve limiting the return of water from the system complete the design.
DRY RUN PRO technology increases the motor’s resistance to seizure in the event of brief dry running. The 230 V version is supplied with a start box containing a capacitor and overcurrent protection, as well as thermal protection built into the motor winding.
- Pump type: multistage, submersible, entirely made of stainless steel
- Diameter: 98 mm (4")
- Minimum well diameter: 115 mm
- Power supply: 230 V or 400 V
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Max. fluid temperature: 35°C
- Permissible sand content: up to 185 g/m³
- Maximum number of starts per hour: 30
- Power cable: 1.5 m (longer cable available in 5 m increments)
- Rotational speed: 2850 rpm
- Materials: suction and discharge body, housing, shaft, and rotor – AISI 304 stainless steel, impeller and diffuser – PPO polymer, mechanical seal – SiC/SiC/NBR
- Additional features: built-in check valve, floating impellers, DRY RUN PRO technology
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – 4" FP4 submersible pump
What well is the 4" FP4 submersible pump suitable for?
The pump is intended for wells with a minimum internal diameter of 115 mm. Before purchasing, it is worth checking the actual diameter of the borehole to avoid installation problems or motor overheating.
What makes the 4" FP4 pump stand out?
The pump uses DRY RUN PRO technology, which increases resistance to seizure during brief dry running, and it can be installed both vertically and horizontally. Built-in floating impellers and a check valve additionally extend the device’s service life.
How does the 4" FP4 pump differ from the IBO 4" SD pump?
Both series have similar applications and diameters, but they differ in the body material – the 4" FP4 has a suction and discharge body made entirely of stainless steel, while the 4" SD uses brass for this component. The choice also depends on whether horizontal installation is required, which is available only in the 4" FP4 series.
How do I select the right 4" FP4 pump model for my needs?
The choice of model depends on the well depth and the amount of water needed at the same time – the series includes a wide range of variants with different head heights and capacities, from modest domestic requirements to larger agricultural and industrial installations. If in doubt, we encourage you to contact the technical department.
Where can I buy a 4" FP4 submersible pump?
Dambat does not sell directly to consumers. 4" FP4 series pumps are available from trade partners, installation wholesalers, and authorized online distributors.
What warranty terms apply to the 4" FP4 pump?
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
- Power: 2.2 kW,
- Power supply: 1~230 V,
- Frequency: 50 Hz,
- Current draw: 14.8 A,
- Motor speed: 2850 rpm,
- Dimensions: 98/1290 mm
- Weight: 24.5 kg,
4" FP4 D030 – 230 V multistage submersible pump
The 4" FP4 D030 submersible pump from IBO ITALY is a multistage Italian design made entirely of stainless steel, intended for drawing and pumping raw water in single- and multi-family homes, farms, and industrial and fire protection systems. DRY RUN PRO technology increases resistance to seizure in the event of dry running, while the option of horizontal or vertical installation increases installation flexibility.
Who it is for
- Owners of single- and multi-family homes – the series’ wide range of power and capacity makes it possible to select a model suited to the well depth and water demand.
- Farms and horticultural operations – the higher-output models in the series supply irrigation systems, sprinklers, and drip lines.
- Industrial and fire protection systems – the all-stainless-steel construction and option of horizontal operation are suitable for non-standard installation layouts.
- Installers – the option of ordering a cable with a length selected in 5 m increments makes it easier to match the pump to the depth of a specific well.
Applications
The 4" FP4 series is intended for drawing and pumping technically clean raw water from drilled deep-water wells for single- and multi-family homes, farms, irrigation systems, fire protection systems, industrial applications, and drainage. The construction tolerates sand content of up to 185 g/m³. The pump is not a water treatment device – when using it for other purposes, we recommend ensuring appropriate water treatment.
The pumps can operate vertically or horizontally, in wells with a minimum internal diameter of 115 mm, at a maximum pumped-water temperature of 35°C. The 4" FP4 230 V / 400 V submersible pump works with standard pressure tanks and pressure-control systems.
Features of the 4" FP4 series
The 4" FP4 series pumps are made entirely of AISI 304 stainless steel – the suction and discharge body, housing, shaft, and rotor – providing corrosion resistance under typical operating conditions. The impeller and diffuser are made of polymer (PPO), while the mechanical seal uses a SiC/SiC/NBR configuration. Built-in floating impellers and a check valve limiting the return of water from the system complete the design.
DRY RUN PRO technology increases the motor’s resistance to seizure in the event of brief dry running. The 230 V version is supplied with a start box containing a capacitor and overcurrent protection, as well as thermal protection built into the motor winding.
- Pump type: multistage, submersible, entirely made of stainless steel
- Diameter: 98 mm (4")
- Minimum well diameter: 115 mm
- Power supply: 230 V or 400 V
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Max. fluid temperature: 35°C
- Permissible sand content: up to 185 g/m³
- Maximum number of starts per hour: 30
- Power cable: 1.5 m (longer cable available in 5 m increments)
- Rotational speed: 2850 rpm
- Materials: suction and discharge body, housing, shaft, and rotor – AISI 304 stainless steel, impeller and diffuser – PPO polymer, mechanical seal – SiC/SiC/NBR
- Additional features: built-in check valve, floating impellers, DRY RUN PRO technology
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – 4" FP4 submersible pump
What well is the 4" FP4 submersible pump suitable for?
The pump is intended for wells with a minimum internal diameter of 115 mm. Before purchasing, it is worth checking the actual diameter of the borehole to avoid installation problems or motor overheating.
What makes the 4" FP4 pump stand out?
The pump uses DRY RUN PRO technology, which increases resistance to seizure during brief dry running, and it can be installed both vertically and horizontally. Built-in floating impellers and a check valve additionally extend the device’s service life.
How does the 4" FP4 pump differ from the IBO 4" SD pump?
Both series have similar applications and diameters, but they differ in the body material – the 4" FP4 has a suction and discharge body made entirely of stainless steel, while the 4" SD uses brass for this component. The choice also depends on whether horizontal installation is required, which is available only in the 4" FP4 series.
How do I select the right 4" FP4 pump model for my needs?
The choice of model depends on the well depth and the amount of water needed at the same time – the series includes a wide range of variants with different head heights and capacities, from modest domestic requirements to larger agricultural and industrial installations. If in doubt, we encourage you to contact the technical department.
Where can I buy a 4" FP4 submersible pump?
Dambat does not sell directly to consumers. 4" FP4 series pumps are available from trade partners, installation wholesalers, and authorized online distributors.
What warranty terms apply to the 4" FP4 pump?
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.