Description
What is this 4" SVM pump?
4" SVM is a multi-stage submersible pump with a diameter of 104 mm with a 30 m cable, intended for wells from 115 mm, with increased resistance to sand, used to supply water to residential buildings, farms and irrigation systems as well as in drainage systems, with a 24-month warranty. Available with IBO engines.
For whom?
- For owners of single- and multi-family houses who need a reliable 4" SVM submersible pump for constant water supply from drilled and dug wells.
- For farms looking for a permanent source of water for watering animals, powering farm installations and working in conditions of increased sand content.
- For users of irrigation systems (sprinklers, drip lines) who care about stable efficiency up to 67 or 133 l/min and high lifting heights when powered by 230 V.
- For installation and service companies installing deep well pumps in wells with an internal diameter of 115 mm and above, who expect a ready-made set with a starter box and motor protection.
- For users requiring service support, for whom the presence of warranty and post-warranty service as well as overcurrent and thermal protection of the motor are important.
Application
- Supplying water to single- and multi-family houses from deep wells with a minimum diameter of 115 mm, using a pump diameter of 104 mm and a vertical operating position.
- Power supply irrigation systems in gardens and crops (sprinklers, drip lines), requiring high lifting heights from 71 to 167 m and efficiency up to 133 l/min depending on the 4" SVM model.
- Work on farms and with drainage, where increased resistance to sand and high-quality AISI 304 materials and PPO polymer ensure longer service life in contaminated water conditions.
- Systems requiring continuous operation with a maximum of 20 starts per hour and an immersion depth of up to 100 m, while maintaining a liquid temperature of up to 35°C and IP68 protection class.
The 4" SVM submersible pump with a 30 m cable is suitable for both home and agricultural and irrigation installations, especially where sand resistance and vertical installation of the pump are necessary.
Features, description and technical data
The 4" SVM is a multi-stage submersible pump with a diameter of 104 mm, suitable for installation in wells with a minimum internal diameter of 115 mm, equipped with an oil-cooled motor with thermal protection in the winding, a starting box with built-in overcurrent protection and a capacitor, and a 30 m long power cable, which allows installation at a considerable depth.
The hydraulic design of the 4" SVM pump has been optimized for increased sand resistance thanks to the use of a metal suction and discharge body, AISI 304 stainless steel casing, shaft and rotor, PPO polymer impellers and diffusers, and a SiC/SiC/NBR mechanical stuffing box, which reduces wear of working elements in contaminated water conditions.
The 4" SVM submersible pump operates continuously with a single-phase 230 V power supply, insulation class B, IP68 protection level, maximum liquid temperature of 35°C, maximum immersion depth of 100 m and engine speed of 2850 rpm, and the permissible number of starts is up to 20 per hour, which ensures stable operating parameters in demanding installations.
The series includes 4" SVM 2-18, 2-25 and 2-35 models with a capacity of 67 l/min and lifting heights of 71, 101 and 140 m, respectively, with an engine power of 0.55; 0.75 and 1.1 kW, current consumption 5.4–9.1 A, dimensions 104/655–104/855 mm and weight 10–14.5 kg, intended for installations requiring high lifting with moderate flow.
The 4" SVM 5-22, 5-30 and 5-40 models offer a capacity of 133 l/min at lifting heights of 88, 118 and 167 m, with power of 1.1, 1.5 and 2.2 kW, power consumption of 9.1–16.4 A, dimensions of 104/794–104/1130 mm and weight 13.5-20.2 kg, making them suitable for more demanding irrigation systems and farms with high water demand. All models are equipped with a 1 1/4" discharge connection.
The operating position of the 4" SVM pump is vertical, and proper installation requires suspending the pump on a rope or support pipe, taking into account the appropriate diameter of the discharge pipe and protecting the installation against dry running and too frequent starts, in accordance with the recommended number of starts per hour and electrical parameters.
Warranty and post-warranty service provides support in the field of diagnostics and repairs, with a 24-month warranty valid when used in accordance with the intended use, operating parameters and requirements for the quality of pumped water, without exceeding the permissible electrical and hydraulic loads.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
FAQ
Where can you buy a 4" SVM submersible pump and what is its availability?
4" SVM submersible pumps are available for sale online and at stationary points and wholesalers cooperating with Dambat - it is best to confirm detailed availability and delivery dates with an authorized distributor or in the manufacturer's online store.
What is the warranty for the 4" SVM pump and what is needed when reporting?
The 4" SVM submersible pump is covered by a 24-month warranty, and when filing a complaint, the data from the proof of purchase and the model and serial number from the nameplate are required, while maintaining the conditions of proper installation and operation. The complaint can be made via our service system available on the website.
What applications is the 4" SVM submersible pump best suited for?
The 4" SVM pump is intended for supplying water to houses, farms and irrigation and drainage systems, when installed in wells with a minimum diameter of 115 mm and operating in a vertical position with a submersion of up to 100 m.
What are the differences between the individual 4" SVM models in the series?
The 4" SVM 2-18, 2-25 and 2-35 models offer a constant capacity of 67 l/min at increasing lifting heights of 71–140 m and a power of 0.55–1.1 kW, while the 5-22, 5-30 and 5-40 models provide a capacity of 133 l/min at a lifting height of 88–167 m and a power of 1.1–2.2 kW, allowing you to choose pump to the required flow and pressure combination.
How to properly install a 4" SVM submersible pump in a well?
The pump should be lowered vertically into a well with a diameter of at least 115 mm on a rope or support pipe, with the discharge pipe connected to a 1 1/4" stub, ensuring the appropriate cable length of 30 m, electrical protection and avoiding dry running and too frequent starts.
What are the key operating parameters of the 4" SVM pump?
The pump operates continuously with a 230 V power supply, insulation class B, IP68 protection level, maximum liquid temperature of 35°C, maximum immersion depth of 100 m and rotational speed of 2850 rpm, with a limit of up to 20 starts per hour.
What materials are used in the 4" SVM pump and what effect does it have on durability?
The pump uses a metal suction and discharge body, casing, shaft and rotor made of AISI 304 stainless steel, impellers and diffusers made of PPO polymer and a mechanical stuffing box SiC/SiC/NBR, which increases resistance to corrosion, sand and operation in wells with increased contamination content.
- Diameter: ,
- Lifting: 167.0 m,
- Performance: 133.0 l/min.,
- Power: 2.2 kW,
- Power supply: ,
- Frequency: 50 Hz,
- Current: 16.4 Oh,
- Motor Speed: 2850 rpm,
- Insulation class: B,
- Working mode: continuous,
- Degree of protection: IP68,
- Connection [DN/inch]: 1¼,
- Working position: Vertical,
- Max. liquid temperature: 35°C,
- Max. number of starts per 1 hour: ,
- Max. immersion depth: 100 m,
- Power cable length: 30.0 m,
- Diameter/height: 1130/104 mm,
- Weight: 20.2 kg,
----------
• Suction/delivery body: metal
• Housing: AISI 304 stainless steel
• Shaft and rotor: AISI 304 stainless steel
• Impeller: PPO polymer
• Diffuser: PPO polymer
• Mechanical stuffing box: SiC / SiC / NBR
• Engine: oil cooled
What is this 4" SVM pump?
4" SVM is a multi-stage submersible pump with a diameter of 104 mm with a 30 m cable, intended for wells from 115 mm, with increased resistance to sand, used to supply water to residential buildings, farms and irrigation systems as well as in drainage systems, with a 24-month warranty. Available with IBO engines.
For whom?
- For owners of single- and multi-family houses who need a reliable 4" SVM submersible pump for constant water supply from drilled and dug wells.
- For farms looking for a permanent source of water for watering animals, powering farm installations and working in conditions of increased sand content.
- For users of irrigation systems (sprinklers, drip lines) who care about stable efficiency up to 67 or 133 l/min and high lifting heights when powered by 230 V.
- For installation and service companies installing deep well pumps in wells with an internal diameter of 115 mm and above, who expect a ready-made set with a starter box and motor protection.
- For users requiring service support, for whom the presence of warranty and post-warranty service as well as overcurrent and thermal protection of the motor are important.
Application
- Supplying water to single- and multi-family houses from deep wells with a minimum diameter of 115 mm, using a pump diameter of 104 mm and a vertical operating position.
- Power supply irrigation systems in gardens and crops (sprinklers, drip lines), requiring high lifting heights from 71 to 167 m and efficiency up to 133 l/min depending on the 4" SVM model.
- Work on farms and with drainage, where increased resistance to sand and high-quality AISI 304 materials and PPO polymer ensure longer service life in contaminated water conditions.
- Systems requiring continuous operation with a maximum of 20 starts per hour and an immersion depth of up to 100 m, while maintaining a liquid temperature of up to 35°C and IP68 protection class.
The 4" SVM submersible pump with a 30 m cable is suitable for both home and agricultural and irrigation installations, especially where sand resistance and vertical installation of the pump are necessary.
Features, description and technical data
The 4" SVM is a multi-stage submersible pump with a diameter of 104 mm, suitable for installation in wells with a minimum internal diameter of 115 mm, equipped with an oil-cooled motor with thermal protection in the winding, a starting box with built-in overcurrent protection and a capacitor, and a 30 m long power cable, which allows installation at a considerable depth.
The hydraulic design of the 4" SVM pump has been optimized for increased sand resistance thanks to the use of a metal suction and discharge body, AISI 304 stainless steel casing, shaft and rotor, PPO polymer impellers and diffusers, and a SiC/SiC/NBR mechanical stuffing box, which reduces wear of working elements in contaminated water conditions.
The 4" SVM submersible pump operates continuously with a single-phase 230 V power supply, insulation class B, IP68 protection level, maximum liquid temperature of 35°C, maximum immersion depth of 100 m and engine speed of 2850 rpm, and the permissible number of starts is up to 20 per hour, which ensures stable operating parameters in demanding installations.
The series includes 4" SVM 2-18, 2-25 and 2-35 models with a capacity of 67 l/min and lifting heights of 71, 101 and 140 m, respectively, with an engine power of 0.55; 0.75 and 1.1 kW, current consumption 5.4–9.1 A, dimensions 104/655–104/855 mm and weight 10–14.5 kg, intended for installations requiring high lifting with moderate flow.
The 4" SVM 5-22, 5-30 and 5-40 models offer a capacity of 133 l/min at lifting heights of 88, 118 and 167 m, with power of 1.1, 1.5 and 2.2 kW, power consumption of 9.1–16.4 A, dimensions of 104/794–104/1130 mm and weight 13.5-20.2 kg, making them suitable for more demanding irrigation systems and farms with high water demand. All models are equipped with a 1 1/4" discharge connection.
The operating position of the 4" SVM pump is vertical, and proper installation requires suspending the pump on a rope or support pipe, taking into account the appropriate diameter of the discharge pipe and protecting the installation against dry running and too frequent starts, in accordance with the recommended number of starts per hour and electrical parameters.
Warranty and post-warranty service provides support in the field of diagnostics and repairs, with a 24-month warranty valid when used in accordance with the intended use, operating parameters and requirements for the quality of pumped water, without exceeding the permissible electrical and hydraulic loads.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
FAQ
Where can you buy a 4" SVM submersible pump and what is its availability?
4" SVM submersible pumps are available for sale online and at stationary points and wholesalers cooperating with Dambat - it is best to confirm detailed availability and delivery dates with an authorized distributor or in the manufacturer's online store.
What is the warranty for the 4" SVM pump and what is needed when reporting?
The 4" SVM submersible pump is covered by a 24-month warranty, and when filing a complaint, the data from the proof of purchase and the model and serial number from the nameplate are required, while maintaining the conditions of proper installation and operation. The complaint can be made via our service system available on the website.
What applications is the 4" SVM submersible pump best suited for?
The 4" SVM pump is intended for supplying water to houses, farms and irrigation and drainage systems, when installed in wells with a minimum diameter of 115 mm and operating in a vertical position with a submersion of up to 100 m.
What are the differences between the individual 4" SVM models in the series?
The 4" SVM 2-18, 2-25 and 2-35 models offer a constant capacity of 67 l/min at increasing lifting heights of 71–140 m and a power of 0.55–1.1 kW, while the 5-22, 5-30 and 5-40 models provide a capacity of 133 l/min at a lifting height of 88–167 m and a power of 1.1–2.2 kW, allowing you to choose pump to the required flow and pressure combination.
How to properly install a 4" SVM submersible pump in a well?
The pump should be lowered vertically into a well with a diameter of at least 115 mm on a rope or support pipe, with the discharge pipe connected to a 1 1/4" stub, ensuring the appropriate cable length of 30 m, electrical protection and avoiding dry running and too frequent starts.
What are the key operating parameters of the 4" SVM pump?
The pump operates continuously with a 230 V power supply, insulation class B, IP68 protection level, maximum liquid temperature of 35°C, maximum immersion depth of 100 m and rotational speed of 2850 rpm, with a limit of up to 20 starts per hour.
What materials are used in the 4" SVM pump and what effect does it have on durability?
The pump uses a metal suction and discharge body, casing, shaft and rotor made of AISI 304 stainless steel, impellers and diffusers made of PPO polymer and a mechanical stuffing box SiC/SiC/NBR, which increases resistance to corrosion, sand and operation in wells with increased contamination content.
