4" SPINOX 2-6 (0,37 kW, 230 V) submersible pump with an IBO ITALY motor

4" SPINOX 2-6 (0.37 kW, 230 V) – a multistage stainless steel submersible pump with an IBO ITALY oil-filled motor

The 4" SPINOX with an IBO ITALY oil-filled motor is a multistage submersible pump with a diameter of 98 mm, made entirely of AISI 304 stainless steel, designed for drawing and pumping technically clean raw / untreated water from drilled deep-water intakes with a minimum internal diameter of 115 mm. The pump is driven by an oil-filled motor the IBO ITALY brand. The series includes a range of models with different hydraulic parameters and a wide range of power ratings. This variety makes it possible to select the ideal model for unique needs.

Who it is for

• Farms and companies supplying systems from their own sources – field irrigation, dewatering work, and industrial applications—where any contact between the water and the motor's lubricating oil is irrelevant.
• Installers selecting pumps for different types of wells – several hydraulic versions and 230 V / 400 V variants make it easier to precisely match the model to the intake depth and the available power supply on the property.
• Holiday resorts and multi-family buildings – seasonal or year-round supply of utility water in locations without access to the municipal water network
• Users modernizing water systems – precise gradation of models in terms of hydraulic parameters and dimensions makes it possible to match the device to the required conditions.

Applications

• Drawing and pumping raw water from drilled deep wells before the treatment process.
• Supplying domestic and agricultural properties with water from their own deep well.
• Industrial applications and dewatering work where a pump with increased resistance to continuous operation is required.

Depending on the capacity of the selected model, 4" SPINOX pumps with an IBO ITALY oil-filled motor are ideal for shallower domestic wells supplying a single both households and deeper intakes or installations serving several buildings at the same time. The 4" SPINOX 2-6 submersible pump (0.37 kW, 230 V) with an IBO ITALY oil-filled motor is selected individually based on the parameters of the specific well—its depth and diameter and the required capacity.

Water drawn from a deep well may require treatment, particularly filtration mechanical filtration, iron removal, manganese removal, or disinfection, depending on the test results for its intended quality. The 4" SPINOX pump is not a water treatment device and does not constitute confirmation of its suitability for human consumption must be provided – if the water is to be used for drinking, cooking, or other household purposes, an appropriate system water treatment and quality control at the point of use.

Features, description, and technical data

The 4" SPINOX with an IBO ITALY oil-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge bodies, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This design provides increased resistance for resistance to wear and a long service life when operating in contact with raw water, which may contain fine mineral impurities. The mechanical seal is made in a configuration ceramic / SiC / NBR. The pump is factory-fitted with a check valve, preventing preventing water from flowing back in the discharge pipeline after the pump stops.

The drive is an oil-filled motor manufactured by IBO ITALY, cooled and lubricated by oil located in a sealed motor chamber. In the 230 V version, the pump operates with a starting box with built-in overcurrent protection and a capacitor. The power cable length selected for the specific device variant and well depth.

The operation of the 4" SPINOX pump can be expanded with dry-run protection operating without the need to install additional probes or sensors in the well, while in systems with two pumps supplying a common system, alternating control is possible. The pump operates continuously, in a vertical or horizontal position, at a maximum temperature of pumped liquid: 35°C.

• Device type: multistage submersible pump
• IBO ITALY motor: IBO ITALY (oil-filled motor)
• Model: 4" SPINOX 2-6
• Motor power: 0.37 kW
• Power supply: 230 V
• Motor design: oil-filled
• Starting box with overcurrent protection: yes
• Pump diameter: 98 mm
• Minimum well diameter: 115 mm
• Materials: body, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
• Motor speed: 2850 rpm
• Max. pumped liquid temperature: 35°C
• Protection rating: IP68
• Operating mode: continuous
• Operating position: vertical / horizontal
• Built-in check valve: yes

Detailed technical data for the specific variant – maximum capacity Qmax, head Hmax, current draw, the length and weight of the set, the discharge connection, and the cable length power supply cable – specified in the product's technical data table.

IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.

Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.

Frequently Asked Questions (FAQ) – 4" SPINOX submersible pump with an IBO ITALY oil-filled motor