4" SPINOX 2-18 (0,75 kW, 230 V) deep well pump with IBO ITALY motor

4" SPINOX 2-18 (0.75 kW, 230 V) - multistage stainless steel submersible pump, IBO ITALY oil-filled motor

The 4" SPINOX with an IBO ITALY oil-filled motor is a multistage submersible pump with a diameter of 98 mm, made entirely of AISI 304 stainless steel, designed to extract and pump technically clean raw / untreated water from drilled deep-water intakes with a minimum internal diameter of 115 mm. The pump is driven by an IBO ITALY oil-filled motor. The series includes a range of models with different hydraulic parameters and a wide range of power ratings. This variety makes it possible to find the ideal model for specific needs.

Who it's for

• Farms and businesses supplying systems from their own sources – field irrigation, drainage work and industrial applications, where potential contact between the water and the motor's lubricating oil is of no consequence.
• Installers selecting pumps for wells with varying specifications – several hydraulic versions and 230 V / 400 V options make it easier to precisely match the model to the intake depth and available power supply on site.
• Holiday resorts and multi-family properties – seasonal or year-round supply of utility water in locations without access to the municipal water supply
• Users upgrading water systems – precisely graded models in terms of hydraulic parameters and dimensions make it possible to match the equipment to the required conditions.

Applications

• Extraction and pumping of raw water from drilled deep wells before treatment.
• Water supply for households and farms from their own deep wells.
• Industrial applications and drainage work requiring a pump with increased resistance to continuous operation.

Depending on the performance of the selected model, 4" SPINOX pumps with an IBO ITALY oil-filled motor are ideal for shallower domestic wells supplying a single household as well as deeper water sources or installations serving several buildings at once. The 4" SPINOX 2-18 submersible pump (0.75 kW, 230 V) with an IBO ITALY oil-filled motor is selected individually to suit the parameters of each well - its depth, diameter, and required output.

Water drawn from a deep well may require treatment, particularly mechanical filtration, iron removal, manganese removal, or disinfection, depending on the results of water quality testing. The 4" SPINOX pump is not a water treatment device and does not certify that the water is suitable for human consumption. If the water is to be used for drinking, cooking, or other household purposes, an appropriate treatment system and water quality monitoring at the point of use must be provided.

Features, description, and technical data

The 4" SPINOX with an IBO ITALY oil-filled motor is a multistage submersible pump whose key structural components – the suction and discharge bodies, casing, shaft, impeller, and diffuser – are all made of AISI 304 stainless steel. This design provides increased wear resistance and a long service life when operating in raw water, which may contain fine mineral impurities. The mechanical seal uses a ceramic / SiC / NBR configuration. The pump is factory-fitted with a check valve to prevent water from flowing back into the discharge pipe when the pump stops.

The pump is driven by an oil-filled motor from IBO ITALY, cooled and lubricated by oil in a sealed motor chamber. W the 230 V version, the pump works with a start box featuring built-in overcurrent protection and a capacitor. The power cable length is selected for the specific device variant and well depth.

The operation of the 4" SPINOX pump can be expanded with dry-run protection that works without the need to install additional probes or sensors in the well. In installations with two pumps supplying a shared system, they can be controlled alternately. The pump operates continuously, in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C.

• Device type: multistage submersible pump
• Motor brand: IBO ITALY (oil-filled motor)
• Model: 4" SPINOX 2-18
• Motor power: 0.75 kW
• Power supply: 230 V
• Motor design: oil-filled
• Start box with overcurrent protection: yes
• Pump diameter: 98 mm
• Minimum well diameter: 115 mm
• Materials: body, casing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
• Motor speed: 2850 rpm
• Max. pumped liquid temperature: 35°C
• Protection rating: IP68
• Operating mode: continuous
• Operating position: vertical / horizontal
• Built-in check valve: yes

Detailed technical specifications for the specific variant – Qmax flow rate, Hmax head, power consumption, set length and weight, discharge connection, and power cable length – are provided in the product's technical data table.

IBO ITALY – 36-month (3-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.

Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.

Frequently Asked Questions (FAQ) – 4" SPINOX submersible pump with an IBO ITALY oil-filled motor