4" SPINOX 14-8 (2,2 kW, 230 V) deep well pump with IBO ITALY motor

4" SPINOX 14-8 (2.2 kW, 230 V) - multistage stainless steel submersible pump, IBO ITALY oil-filled motor

The 4" SPINOX with IBO ITALY oil-filled motor is a multistage submersible pump with a diameter of 98 mm, made entirely of AISI 304 stainless steel, designed to draw and pump technically clean raw / untreated water from drilled deep wells with a minimum internal diameter of 115 mm. The pump is driven by an IBO ITALY oil-filled motor. The series includes a range of models with differing hydraulic parameters and a wide range of power ratings. This variety makes it possible to select the ideal model for specific needs.

Who it's for

• Farms and businesses supplied by their own sources – field irrigation, dewatering work, industrial uses — where potential contact between water and the motor's lubricating oil is not an issue.
• Installers selecting pumps for wells of varying specifications – several hydraulic versions and 230 V / 400 V variants make it easier to precisely match the model to the well depth and the power supply available on site.
• Holiday resorts and multi-family buildings – seasonal or year-round supply of utility water in locations without access to the municipal water network
• Users upgrading their water systems – precise gradation of models in terms of hydraulic parameters and dimensions makes it possible to match the equipment to the required conditions.

Applications

• Drawing and pumping raw water from drilled deep wells before treatment.
• Water supply for households and farms from their own deep well.
• Industrial applications and dewatering work requiring a pump with increased resistance to continuous operation.

Depending on the capacity of the selected model, 4" SPINOX pumps with IBO ITALY oil-filled motors are ideal for shallower domestic wells supplying a single household, as well as deeper water intakes or installations serving several buildings at once. The 4" SPINOX 14-8 submersible pump (2.2 kW, 230 V) with an IBO ITALY oil-filled motor is selected individually to match the specifications of a particular well - its depth, diameter and required capacity.

Water drawn from a deep well may require treatment, particularly mechanical filtration, iron removal, manganese removal or disinfection, depending on the results of water quality testing. The 4" SPINOX pump is not a water treatment device and does not certify that the water is suitable for human consumption. If the water is to be used for drinking, cooking or other household purposes, an appropriate treatment system must be provided, along with water quality monitoring at the point of use.

Features, description and technical data

The 4" SPINOX with an IBO ITALY oil-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge body, casing, shaft, impeller and diffuser – are made of AISI 304 stainless steel. This construction provides increased wear resistance and a long service life when operating in contact with raw water, which may contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR configuration. The pump is factory-fitted with a check valve to prevent water from flowing back through the discharge pipe after the pump stops.

The pump is driven by an oil-filled motor from IBO ITALY, cooled and lubricated by oil contained in a sealed motor chamber. W the 230 V version, the pump works with a starting box featuring built-in overcurrent protection and a capacitor. The power cable length is selected to suit the specific device variant and well depth.

The operation of the 4" SPINOX pump can be enhanced with dry-run protection that works without installing additional probes or sensors in the well. In systems with two pumps supplying a shared system, they can be controlled in alternation. The pump operates continuously in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C.

• Device type: multistage submersible pump
• Motor: IBO ITALY (oil-filled motor)
• Model: 4" SPINOX 14-8
• Motor power: 2.2 kW
• Power supply: 230 V
• Motor construction: oil-filled
• Starting box with overcurrent protection: yes
• Pump diameter: 98 mm
• Minimum well diameter: 115 mm
• Materials: body, casing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
• Motor speed: 2850 rpm
• Max. pumped liquid temperature: 35°C
• Protection rating: IP68
• Operating mode: continuous
• Operating position: vertical / horizontal
• Built-in check valve: yes

Detailed technical data for each model – capacity Qmax, head Hmax, current consumption, set length and weight, discharge connection, and power cable length – is provided in the product’s technical data table.

IBO ITALY – 36 months (3 years) of manufacturer’s warranty. Dambat provides warranty and post-warranty service.

Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.

Frequently asked questions (FAQ) – 4" SPINOX deep well pump with an IBO ITALY oil-filled motor