4" SPINOX 10-7 (1,5 kW, 230 V) deep well pump with IBO ITALY motor

4" SPINOX 10-7 (1.5 kW, 230 V) - multistage stainless steel submersible pump, IBO ITALY oil-filled motor

The 4" SPINOX with an IBO ITALY oil-filled motor is a multistage submersible pump with a diameter of 98 mm, made entirely of AISI 304 stainless steel and designed to draw and pump clean, untreated raw water from drilled deep wells with a minimum internal diameter of 115 mm. The pump is driven by an IBO ITALY oil-filled motor. The series includes a range of models with different hydraulic parameters and a wide range of power ratings. This variety makes it possible to choose the ideal model for unique needs.

Who it's for

• Farms and businesses supplied by their own sources - field irrigation, drainage work and industrial purposes - where any contact between the water and the motor's lubricating oil is not an issue.
• Installers selecting pumps for wells of varying types - several hydraulic versions and 230 V / 400 V options make it easy to match the model to the depth of the water intake and the available power supply on the property.
• Holiday resorts and multi-family buildings - seasonal or year-round supply of domestic water in locations without access to the municipal water network
• Users upgrading their water systems - precise gradation of models by hydraulic parameters and dimensions makes it possible to match the device to the required conditions.

Applications

• Drawing and pumping raw water from drilled deep wells before treatment.
• Supplying households and farms with water from their own deep well.
• Industrial applications and drainage work where a pump with increased resistance to continuous operation is required.

W Depending on the capacity of the selected model, 4" SPINOX pumps with IBO ITALY oil-filled motors are ideal for shallower domestic wells supplying a single household, as well as deeper water intakes or installations serving several buildings at once. The 4" SPINOX 10-7 submersible pump (1.5 kW, 230 V) with an IBO ITALY oil-filled motor is selected to suit the specific parameters of each well - its depth, diameter and required capacity.

Water drawn from a deep well may require treatment, particularly mechanical filtration, iron removal, manganese removal or disinfection, depending on the results of water quality testing. The 4" SPINOX pump does not treat water and does not certify that it is safe for human consumption. If the water is to be used for drinking, cooking or other household purposes, an appropriate treatment system and water quality monitoring at the point of use must be provided.

Features, description and technical data

The 4" SPINOX with an IBO ITALY oil-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge bodies, housing, shaft, impeller and diffuser – are made of AISI 304 stainless steel. This design provides increased resistance to wear and a long service life when operating in contact with raw water, which may contain fine mineral contaminants. The mechanical seal uses a ceramic / SiC / NBR arrangement. The pump is factory-equipped with a check valve to prevent water from flowing back through the discharge pipe after the pump stops.

The pump is driven by an oil-filled motor from IBO ITALY, cooled and lubricated by oil contained in a sealed motor chamber. W the 230 V version, the pump works with a start-up box with built-in overcurrent protection and a capacitor. The power cable length is selected for the specific device variant and well depth.

The operation of the 4" SPINOX pump can be upgraded with dry-run protection that works without the need to install additional probes or sensors in the well. In systems with two pumps supplying a shared system, they can be controlled alternately. The pump runs continuously in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C.

• Device type: multistage submersible pump
• Motor brand: IBO ITALY (oil-filled motor)
• Model: 4" SPINOX 10-7
• Motor power: 1.5 kW
• Power supply: 230 V
• Motor design: oil-filled
• Start-up box with overcurrent protection: yes
• Pump diameter: 98 mm
• Minimum well diameter: 115 mm
• Materials: body, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
• Motor speed: 2850 rpm
• Max. pumped liquid temperature: 35°C
• Protection rating: IP68
• Operating mode: continuous
• Operating position: vertical / horizontal
• Built-in check valve: yes

Detailed technical data for the specific variant - capacity Qmax, head Hmax, current consumption, set length and weight, discharge connection, and power cable length are listed in the product's technical data table.

IPRO - 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.

Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.

Frequently Asked Questions (FAQ) - 4" SPINOX submersible pump with an IBO ITALY oil-filled motor