4" SPINOX 10-5 (1,1 kW, 230 V) deep well pump with IPRO motor

4" SPINOX 10-5 (1.1 kW, 230 V) - multistage stainless steel submersible pump, IPRO oil-filled motor

The 4" SPINOX with IPRO oil-filled motor is a multistage submersible pump with a diameter of 98 mm, made entirely of AISI 304 stainless steel and designed to draw and pump technically clean raw / untreated water from drilled deep wells with a minimum internal diameter of 115 mm. The pump is powered by an IPRO oil-filled motor. The series includes a range of models with different hydraulic specifications and a wide power range. This variety makes it possible to select the ideal model for unique needs.

Who it's for

• Farms and companies supplying systems from their own sources - field irrigation, drainage work, industrial purposes - where potential contact between the water and the motor's lubricating oil is not a concern.
• Installers selecting pumps for wells with varying specifications - several hydraulic configurations and 230 V / 400 V variants make it easier to precisely match the model to the well depth and available power supply on site.
• Holiday resorts and multi-family buildings - seasonal or year-round supply of utility water in locations without access to the municipal water supply
• Users upgrading their water systems - precise gradation of models by hydraulic specifications and dimensions makes it possible to match the unit to the required conditions.

Applications

• Drawing and pumping raw water from drilled deep wells before treatment.
• Water supply for households and farms from their own deep well.
• Industrial applications and drainage work requiring a pump with greater resistance to continuous operation.

With performance depending on the selected model, 4" SPINOX pumps with IPRO oil-filled motors are ideal for shallower domestic wells supplying a single household, as well as deeper wells or systems serving several buildings at once. The 4" SPINOX 10-5 submersible pump (1.1 kW, 230 V) with an IPRO oil-filled motor is selected individually according to the specifications of the well in question - its depth, diameter and required capacity.

Water drawn from a deep well may require treatment, particularly mechanical filtration, iron removal, manganese removal or disinfection, depending on the results of water quality testing. The 4" SPINOX pump is not a water treatment device and does not certify that the water is fit for human consumption. If the water is to be used for drinking, cooking or other household purposes, an appropriate water treatment system must be provided, along with water quality monitoring at the point of use.

Features, description and technical specifications

The 4" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge bodies, casing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This design provides increased resistance to wear and a long service life when operating in contact with raw water, which may contain fine mineral impurities. The mechanical seal uses a ceramic / SiC / NBR configuration. The pump is factory-equipped with a check valve to prevent water from flowing back through the discharge pipe after the pump stops.

The drive is an IPRO oil-filled motor, cooled and lubricated by the oil inside the sealed motor chamber. W the 230 V version, the pump works with a starter box featuring built-in overcurrent protection and a capacitor. The power cable length is selected to suit the specific device variant and well depth.

The operation of the 4" SPINOX pump can be upgraded with dry-run protection that works without installing additional probes or sensors in the well. In systems with two pumps supplying a shared system, they can be controlled alternately. The pump operates continuously, in a vertical or horizontal position, at a maximum pumped liquid temperature of 35°C.

• Device type: multistage submersible pump
• IPRO motor: IPRO (oil-filled motor)
• Model: 4" SPINOX 10-5
• Motor power: 1.1 kW
• Power supply: 230 V
• Motor design: oil-filled
• Start box with overcurrent protection: yes
• Pump diameter: 98 mm
• Minimum well diameter: 115 mm
• Materials: body, casing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
• Motor speed: 2850 rpm
• Maximum pumped liquid temperature: 35°C
• Protection rating: IP68
• Operating mode: continuous
• Operating position: vertical / horizontal
• Built-in check valve: yes

Detailed technical specifications for each variant - capacity Qmax, head Hmax, power consumption, set length and weight, discharge connection, and power cable length - are listed in the product's technical data table.

IPRO - 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service provided by Dambat.

Dambat - a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.

Frequently asked questions (FAQ) - 4" SPINOX submersible pump with an IPRO oil-filled motor