4" SPINOX 10-4 (0,75 kW, 230 V) submersible pump with IBO ITALY motor

4" SPINOX 10-4 (0.75 kW, 230 V) – multistage stainless-steel deep-well pump with an IBO ITALY oil-filled motor

The 4" SPINOX with an IBO ITALY oil-filled motor is a multistage deep-well pump with a diameter of 98 mm, made entirely of AISI 304 stainless steel, intended for drawing and pumping technically clean raw / untreated water from drilled deep-water intakes with a minimum internal diameter of 115 mm. The pump is driven by an oil-filled motor IBO ITALY brand. The series includes a range of models with varying hydraulic parameters and a wide range of power ratings. This variety makes it possible to perfectly match the model to unique needs.

For whom

• Farms and companies supplying installations from their own sources – field irrigation, drainage work, and industrial applications—where potential contact between the water and the motor’s lubricating oil is irrelevant.
• Installers selecting pumps for various wells – several hydraulic versions and 230 V / 400 V variants make it easier to precisely match the model to the intake depth and the available power supply on the plot.
• Holiday resorts and multi-family buildings – seasonal or year-round supply of utility water in locations without access to the municipal water supply
• Users modernizing water installations – precise gradation of models in terms of hydraulic parameters and dimensions makes it possible to match the device to the required conditions.

Applications

• Drawing and pumping raw water from drilled deep wells before the treatment process.
• Supplying domestic and agricultural households with water from their own deep well.
• Industrial applications and drainage work requiring a pump with increased resistance to continuous operation.

Depending on the capacity of the selected model, 4" SPINOX pumps with an IBO ITALY oil-filled motor are ideal for shallower domestic wells supplying a single both households and deeper intakes or installations serving several buildings at the same time. The 4" SPINOX 10-4 deep-well pump (0.75 kW, 230 V) with an IBO ITALY oil-filled motor is selected individually based on the parameters of the specific well—its depth and diameter and the required capacity.

Water drawn from a deep well may require treatment, particularly filtration mechanical filtration, iron removal, manganese removal, or disinfection, depending on the test results in terms of quality. The 4" SPINOX pump is not a water-treatment device and does not constitute confirmation that it is suitable for human consumption – if the water is to be used for drinking, cooking, or other household purposes, an appropriate system must be provided water treatment and quality control at the point of collection.

Features, description, and technical data

The 4" SPINOX with an IBO ITALY oil-filled motor is a multistage submersible pump in which all key structural components – the suction and discharge bodies, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This design provides increased resistance for resistance to wear and a long service life when operating in contact with raw water, which may contain fine mineral contaminants. The mechanical seal is made in a ceramic / SiC / NBR. The pump is factory-fitted with a check valve, preventing preventing water from flowing back through the discharge pipeline after the pump stops.

The drive is an oil-filled IBO ITALY motor, cooled and lubricated by the oil located in a sealed motor chamber. In the 230 V version, the pump works with a starting box with built-in overcurrent protection and a capacitor. The power cable length is selected for the specific device variant and well depth.

The operation of the 4" SPINOX pump can be expanded to include dry-run protection which operate without the need to install additional probes or sensors in the well, and in systems With two pumps supplying a shared system, alternating control is possible. The pump operates continuously, in a vertical or horizontal position, at a maximum temperature of the pumped liquid: 35°C.

• Device type: multistage submersible pump
• IBO ITALY motor: IBO ITALY (oil-filled motor)
• Model: 4" SPINOX 10-4
• Motor power: 0.75 kW
• Power supply: 230 V
• Motor design: oil-filled
• Starting box with overcurrent protection: yes
• Pump diameter: 98 mm
• Minimum well diameter: 115 mm
• Materials: body, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
• Motor speed: 2850 rpm
• Max. temperature of pumped liquid: 35°C
• Protection rating: IP68
• Operating mode: continuous
• Operating position: vertical / horizontal
• Built-in check valve: yes

Detailed technical data for the specific variant – Qmax capacity, head height Hmax, current consumption, set length and weight, discharge connection, and cable length power cable – specified in the product's technical data table.

IPRO – 36-month (3-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.

Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certifications.

Frequently Asked Questions (FAQ) – 4" SPINOX deep-well pump with an IBO ITALY oil-filled motor