4" SPINOX 10-10 (2,2 kW, 230 V) submersible pump with an IPRO motor

4" SPINOX 10-10 (2.2 kW, 230 V) – a multistage stainless steel submersible pump with an IPRO oil-filled motor

The 4" SPINOX with an IPRO oil-filled motor is a multistage submersible pump with a diameter of 98 mm, made entirely of AISI 304 stainless steel, designed for drawing and pumping technically clean raw / untreated water from drilled deep-water intakes with a minimum internal diameter of 115 mm. The pump is powered by an oil-filled motor the IPRO brand. The series includes a range of models with varying hydraulic parameters and a wide range of power ratings. This variety makes it possible to choose the model perfectly for unique needs.

For whom

• Farms and companies supplying installations from their own sources – field irrigation, dewatering work, industrial purposes—where any potential contact between the water and the motor's lubricating oil is irrelevant.
• Installers selecting pumps for various wells – several hydraulic versions and 230 V / 400 V variants make it easier to precisely match the model to the intake depth and the power supply available on the property.
• Holiday resorts and multi-family buildings – seasonal or year-round supply of utility water in locations without access to the municipal water network
• Users modernizing their water systems – precise model gradation in terms of hydraulic parameters and dimensions makes it possible to match the device to the required conditions.

Applications

• Drawing and pumping raw water from drilled deep wells before the treatment process.
• Supplying households and farms with water from their own deep well.
• Industrial applications and dewatering work requiring a pump with increased resistance to continuous operation.

Depending on the capacity of the selected model, 4" SPINOX pumps with an IPRO oil-filled motor are ideal for shallower domestic wells supplying a single both households and deeper intakes or installations serving several buildings at the same time. The 4" SPINOX 10-10 submersible pump (2.2 kW, 230 V) with an IPRO oil-filled motor is selected individually based on the parameters of the specific well—its depth and diameter and the required capacity.

Water drawn from a deep well may require treatment, particularly filtration mechanical filtration, iron removal, manganese removal, or disinfection, depending on the test results its quality. The 4" SPINOX pump is not a water-treatment device and does not constitute confirmation of its suitability for human consumption – if the water is to be used for drinking, cooking, or other household purposes, an appropriate system must be provided water treatment and quality control at the point of collection.

Features, description, and technical data

The 4" SPINOX with an IPRO oil-filled motor is a multistage submersible pump in which all the key structural components – the suction and discharge body, housing, shaft, impeller, and diffuser – are made of AISI 304 stainless steel. This design provides increased resistance resistance to wear and a long service life when operating in contact with untreated water, which may contain fine mineral impurities. The mechanical seal is made in a configuration of ceramic / SiC / NBR. The pump is factory-equipped with a check valve, preventing preventing water from flowing back in the discharge pipeline after the pump stops.

The drive is an IPRO oil-filled motor, cooled and lubricated by oil located in a sealed motor chamber. In the 230 V version, the pump works with a starting box with built-in overcurrent protection and a capacitor. The length of the power cable is selected for the specific device variant and well depth.

The operation of the 4" SPINOX pump can be expanded with dry-run protection which operate without the need to install additional probes or sensors in the well, and in systems with two pumps supplying a shared system, alternating control is possible. The pump operates continuously, in a vertical or horizontal position, at a maximum temperature of pumped liquid 35°C.

• Device type: multistage submersible pump
• IPRO motor: IPRO (oil-filled motor)
• Model: 4" SPINOX 10-10
• Motor power: 2.2 kW
• Power supply: 230 V
• Motor design: oil-filled
• Starting box with overcurrent protection: yes
• Pump diameter: 98 mm
• Minimum well diameter: 115 mm
• Materials: body, housing, shaft, impeller, diffuser – AISI 304 stainless steel; mechanical seal – ceramic / SiC / NBR
• Motor speed: 2850 rpm
• Max. pumped liquid temperature: 35°C
• Protection rating: IP68
• Operating mode: continuous
• Operating position: vertical / horizontal
• Built-in check valve: yes

Detailed technical data for the specific variant – capacity Qmax, head Hmax, current consumption, set length and weight, discharge connection, and power cable length power cable – specified in the product's technical data table.

IPRO – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.

Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certificates.

Frequently asked questions (FAQ) – 4" SPINOX submersible pump with an IPRO oil-filled motor