IBO 4 OLA INOX 70/100 submersible pump float switch
The IBO 4 OLA INOX 70/100 multi-stage submersible pump is a reliable device for pumping water in circular and drilled wells with a minimum diameter of 4". The use of a cooling jacket eliminates the requirement for complete immersion of the pump and the need to install a protective pipe. The float switch effectively protects the system against dry running.
For whom (B2B)
-
Water and sewage system installers: they gain a pump ready for installation straight out of the package, thanks to a built-in starting capacitor.
-
Wholesale and technical stores: the product enriches the storage offer in the utility water distribution segment.
-
Agricultural enterprises: they use a pump to provide stable power to irrigation systems, sprinklers and drip lines.
-
Drillers and wellmen: they receive a device equipped with a cooling jacket, which expands the possibilities of installation in unusual or shallow angles.
Application
The IBO 4 OLA INOX 70/100 pump successfully operates in circular and drilled wells. The device is used to supply water to single-family and multi-family buildings, as well as farms. The pump is often used to pump water into irrigation installations, as well as for tasks related to the distribution of liquids from closed tanks.
Thanks to the integrated engine cooling jacket, the device does not have to operate in fully immersed conditions. The pump pumps only clean water. The hydraulic system does not tolerate installations containing abrasive substances in the pumped medium. Corrosive liquids, oils and petroleum substances are categorically excluded from the range of applications of this model.
Features, description and technical data
The casing, shaft and rotor of the pump are made of AISI 304 stainless steel, which effectively protects the structure against corrosion. The pressing parameters are ensured by a durable rotor and diffuser made of PPO polymer. The device has a capacitor built into the motor, so the installer does not have to use an external starter box. The pump is also equipped with thermal cut-off protection located in the winding Power supply in case of risk of overload and temperature increase.
Twenty meters of power cord with a plug makes it easy to connect the equipment to a remote power source. The installed float switch automatically turns off Power supply when lowering the water table, protecting the hydraulics from damage.
- Diameter: 4",
- Lift: 71.0 m,
- Capacity: 100 l/min,
- Power: 1.1 kW,
- Power supply: 1~230V,
- Frequency: 50 Hz,
- Current: 6.9 A,
- Engine speed: 2850 rpm,
- Insulation class: B,
- Operating mode: continuous,
- Degree of protection: IP68,
- Connection [DN/inch]: 1,
- Working position: Vertical,
- Max. liquid temperature: 35°C,
- Max. number of starts per 1 hour: 20,
- Max. immersion depth: 80 m,
- Power cable length: 20.0 m,
- Dimensions diameter/height: 105/790 mm,
- Weight: 15.5 kg,
MATERIALS
- Housing: AISI 304 stainless steel,
- Shaft and rotor: AISI 304 stainless steel,
- Impeller: PPO polymer,
- Diffuser: PPO polymer,
- Mechanical seal: Ceramic/SiC/NBR,
- Engine: cooling jacket.
FAQ – IBO 4 OLA INOX 70/100 submersible pump with float switch (B2B)
Where is this product sold?
Where is this product sold?
+
IBO 4 OLA INOX 70/100 can be found in industry retail outlets and wholesalers cooperating with the IBO brand.
What about service and warranty?
What about service and warranty?
+
The warranty is 24 months. The only authorized one service is run by Dambat, which provides warranty and post-warranty support.
Does the device require a protective pipe?
Does the device require a protective pipe?
+
No, the pump has a built-in motor cooling jacket. Thanks to this, there is no need to install an additional protective pipe, and the equipment does not require complete immersion during operation.
How is the pump motor protected against dry running?
How is the pump motor protected against dry running?
+
The pump is equipped with a float controller. When the water level drops to the set minimum value, the switch cuts off the electricity, preventing the pump from seizing up.
What medium does this pump model tolerate?
What medium does this pump model tolerate?
+
The device pumps only clean water. The hydraulic system is not designed to work with abrasive substances in the pumped medium.
Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.
