IBO 4 OLA AUTO 60 (0.45 kW, 230 V) submersible pump with 20 m cable
IBO 4 OLA AUTO 60 is an automated submersible pump with a diameter of 124 mm, the housing of which is entirely based on AISI 304 stainless steel. The design with a built-in flow sensor independently initiates and interrupts pumping depending on the consumption from the network, permanently eliminating the requirement to use external pressure switches. The use of an efficient cooling jacket facilitates the operation of the equipment, eliminating the need to completely immerse the unit in the medium.
For whom (B2B)
-
Water system installers: Factory integration of the flow sensor eliminates the need to purchase and calibrate external PC or SK controllers.
-
Water intake contractors: The presence of a motor cooling jacket allows the pump to operate without a casing pipe and with partial immersion.
-
Well companies: The capacitor built into the motor and a ready-made 20.0 m long power cable with a plug allow for quick installation right after removing it from the box.
-
Wholesale and technical stores: Expanding the range with a modern, maintenance-free model with a capacity of 55.0 l/min, appreciated for its speed and ease of implementation in the field.
Application
The IBO 4 OLA AUTO 60 pump is primarily used to force circulation in automated water intake systems based on deep wells and large buffer tanks. The unit cooperates with hydraulic intakes, reacting within a few seconds to turning on or off the tap. The design allows direct connection to hydrophore tanks, while the prohibition of duplicating pressure control is maintained.
Thanks to the use of a cooling jacket, the device works well in specific conditions, such as large diameter ring wells or relatively shallow retention ponds. Thermal protection built into the winding increases operational safety in installations requiring continuous operation.
Features
- The pumps have a motor cooling jacket, so the pumps do not have to be fully submerged and there is no need to use a casing pipe, which is required in the case of classic multistage pumps.
- 20 m power cable with plug
- Capacitor built into the engine (no need to use an external starter box)
- The pump is ready for installation immediately after unpacking
- Thermal protection built into the motor winding
- Warranty and post-warranty service
- 24-month warranty
Technical data
- Diameter: 4"
- Lift: 58.0 m
- Capacity: 55.0 l/min.
- Power: 0.45 kW
- Power supply: 1~230V
- Frequency: 50 Hz
- Current: 4.7 A
- Motor speed: 2850 rpm.
- Insulation class: B
- Operating mode: continuous
- Degree of protection: IP68
- Connection [DN/inch]: 1"
- Working position: Vertical
- Max. liquid temperature: 35°C
- Maximum number of starts per hour: 20
- Max. immersion depth: 80 m
- Power cable length: 20.0 m
- Dimensions diameter/height: 124/825 mm
- Weight: 11.0 kg
Materials
- Housing: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller: PPO polymer
- Diffuser: PPO polymer
- Mechanical seal: Ceramic/SiC/NBR
- Engine: cooling jacket
FAQ – IBO 4 OLA AUTO 60
Where is this product sold?
Where is this product sold?
+
IBO 4 OLA AUTO 60 (0.45 kW, 230 V) submersible pump with a 20 m cable can be found in industry retail outlets and wholesalers cooperating with the IBO brand.
Does the pump require an additional pressure controller?
Does the pump require an additional pressure controller?
+
No, the device has been integrated with an automatic flow sensor that turns the drive on and off on an ongoing basis.
Does the device have to be completely underwater?
Does the device have to be completely underwater?
+
Thanks to the use of a factory cooling jacket, the pump can operate safely without the need for complete submersion.
Where is the jumper box?
Where is the jumper box?
+
The capacitor was placed directly in the unit's engine, which completely eliminated the need to use an external starting box.
Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.
