4 OLA AUTO 100 (0.8 kW, 230 V) submersible pump with 20 m cable

IBO 4 OLA AUTO 100 (0.8 kW, 230 V) submersible pump with 20 m cable

IBO 4 OLA AUTO 100 is an automated submersible pump with a diameter of 124 mm, based on an AISI 304 stainless steel structure. The device is equipped with a built-in flow sensor that independently starts and stops the pump in response to the opening or closing of the draw-off valve, eliminating the need to install external pressure switches. Thanks to the use of a cooling jacket, the equipment does not require complete immersion or the use of protective pipes, which facilitates its operation in more difficult conditions.

For whom (B2B)

• Water system installers: Built-in automatic flow testing control eliminates the need to install external PC or SK controllers.
• Water intake contractors: The engine cooling jacket allows for safe operation of the device without the need to fully immerse it and without the use of a protective pipe.
• Well companies: The capacitor integrated in the motor and a 20.0 m long power cable with a plug ensure that the device is ready for installation immediately after unpacking.
• Wholesale and technical stores: Extension of the product range with a modern, automated unit with a built-in non-return valve, which reduces the need for additional assembly equipment.

Application

The IBO 4 OLA AUTO 100 pump was designed to operate automated water intake systems from deep wells and large-size retention tanks. The unit works with standard water intakes, forcing a stable flow immediately after unscrewing the draw-off point. The device can be freely combined with hydrophore tanks without the need to integrate the system with additional pressure switches.

The presence of a cooling jacket significantly expands the installation possibilities, allowing operation in shallow water reservoirs and wide ring wells, where traditional pumps would not have forced cooling. Thermal protection built into the winding protects the drive against overheating during intensive continuous operation.

Features

• The pumps have a motor cooling jacket, so the pumps do not have to be fully submerged and there is no need to use a casing pipe, which is required in the case of classic multistage pumps.
• 20 m power cable with plug
• Capacitor built into the engine (no need to use an external starter box)
• The pump is ready for installation immediately after unpacking
• Thermal protection built into the motor winding
• Warranty and post-warranty service
• 24-month warranty

Technical data

• Diameter: 4"
• Lift: 58.0 m
• Capacity: 90.0 l/min.
• Power: 0.8 kW
• Power supply: 1~230V
• Frequency: 50 Hz
• Current: 5.2 A
• Motor speed: 2850 rpm.
• Insulation class: B
• Operating mode: continuous
• Degree of protection: IP68
• Connection [DN/inch]: 1"
• Working position: Vertical
• Max. liquid temperature: 35°C
• Maximum number of starts per hour: 20
• Max. immersion depth: 80 m
• Power cable length: 20.0 m
• Dimensions diameter/height: 124/946 mm
• Weight: 12.8 kg

Materials

• Housing: AISI 304 stainless steel
• Shaft and rotor: AISI 304 stainless steel
• Impeller: PPO polymer
• Diffuser: PPO polymer
• Mechanical seal: Ceramic/SiC/NBR
• Engine: cooling jacket

FAQ – IBO 4 OLA AUTO 100

Where is this product sold?

How long is the warranty and where to report repairs?

Do I need to install a pressure switch?

What are the benefits of the cooling jacket used?

Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.