4" ISPM 8-13 - submersible pump with 20 m cable
The 4" ISPM submersible pump by IBO is a multi-stage structure made entirely of steel
stainless steel, powered by single-phase 230 V, intended for supplying water to houses
single- and multi-family houses, farms and smaller industrial installations.
A starter box with capacitor and overcurrent protection included makes things simpler
electrical connection, and the factory-installed 20 m cable with a plug allows
skip additional cable extensions at typical installation depths.
For whom
-
Owners of single- and multi-family houses – Power supply 230 V allows installation without a three-phase connection.
-
Agricultural and horticultural farms – higher power models power irrigation systems and drip lines.
-
Plants with smaller production scales – all-stainless steel construction is suitable for continuous operation.
-
Installers – factory 20 m cable with plug shortens installation time at typical depths, without the need to connect wires.
Application
The 4" ISPM series is intended for collecting clean water from drilled deep wells
for the needs of single- and multi-family houses, farms, and irrigation systems
and smaller industrial and drainage installations.
The pumps operate in a vertical position, in wells with a minimum internal diameter of 115 mm,
with a maximum temperature of pumped water up to 35°C. 4" ISPM 230 V submersible pump
works with standard hydrophore tanks and pressure automation.
Features of the 4" ISPM series
The 4" ISPM series pumps are made entirely of AISI 304 stainless steel - from the body
suction and discharge to the impeller and diffuser, which ensures corrosion resistance in typical conditions
operation. Power supply single-phase 230 V requires the use of a starter box
with capacitor and overcurrent protection, supplied in the set.
Additional motor protection is provided by thermal protection built into the winding.
- Pump type: multi-stage, deep-seat, entirely made of stainless steel
- Diameter: 98 mm (4")
- Minimum well diameter: 115mm
- Power supply: 230V (single phase)
- Starter box: included – with capacitor and overcurrent protection
- Power cable length: 20 m
- Degree of protection: IP68
- Working mode: continuous
- Working position: vertical
- Max. liquid temperature: 35°C
- Max. immersion depth: 100 m
- Rotational speed: 2850 rpm
- Materials: suction-delivery body, housing, shaft, rotor, impeller and diffuser – AISI 304 stainless steel, mechanical stuffing box – SiC/SiC/NBR
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – 4" ISPM submersible pump
Which well is the 4" ISPM submersible pump suitable for?
The pump is designed for wells with a minimum internal diameter of 115 mm. Before purchasing
it is worth checking the actual diameter of the hole to avoid installation problems or
engine overheating.
Will a 20 m cable be enough for my well?
The factory cable is 20 m long and is terminated with a plug, as in most household ones
well allows you to skip its extension. For deeper drilling, further extension
it is worth entrusting it to a specialist.
What is the difference between 4" ISPM and 4" ISP?
4" ISPM is a version powered only by single-phase 230 V, supplied with a starter box
containing a capacitor and overcurrent protection. The same models in the 4" ISP series available
are also available in a three-phase 400 V version, without the need for a starter box, and the ISP series
additionally includes higher power models only available in 400V.
What happens if the well runs out of water while the pump is running?
The pump cannot run "dry" - lack of water may cause overheating and damage to the engine,
and such a fault is not covered by the warranty. To exclude this, it is worth installing protection
before dry running, monitoring the water level in the well.
Where can you buy a 4" ISPM submersible pump?
Dambat does not sell directly. 4" ISPM series pumps are available from partners
commercial stores, installation wholesalers and authorized online distributors.
What warranty conditions apply to the 4" ISPM pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service
Dambat assures.
