4" ISPM 3-16 - submersible pump with 20 m cable
The IBO 4" ISPM submersible pump is a multistage design made entirely of stainless steel, powered by single-phase 230 V, and intended for drawing and pumping raw water in single- and multi-family homes, farms, and smaller industrial installations. The included starting box with a capacitor and overcurrent protection simplifies electrical connection, while the factory-fitted 20 m cable with a plug eliminates the need for additional cable extensions at typical installation depths.
Who it is for
-
Owners of single- and multi-family homes – 230 V power allows installation without a three-phase connection.
-
Farms and horticultural businesses – higher-power models supply irrigation systems and drip lines.
-
Smaller-scale production facilities – the all-stainless-steel design is suitable for continuous operation.
-
Installers – the factory-fitted 20 m cable with a plug shortens installation time at typical depths, without the need to join cables.
Applications
The 4" ISPM series is intended for drawing and pumping technically clean raw water from drilled deep wells for single- and multi-family homes, farms, irrigation systems, and smaller industrial and drainage installations. The pump is not a water-treatment device – when using it for other purposes, we recommend ensuring appropriate water preparation.
The pumps operate vertically in wells with a minimum internal diameter of 115 mm, at a maximum pumped-water temperature of 35°C. The 4" ISPM 230 V submersible pump is compatible with standard pressure tanks and pressure-control systems.
Features of the 4" ISPM series
4" ISPM series pumps are made entirely of AISI 304 stainless steel – from the suction and discharge body to the impeller and diffuser, providing corrosion resistance under typical operating conditions. The single-phase 230 V power supply requires a starting box with a capacitor and overcurrent protection, supplied in the set.
Additional motor protection is provided by thermal protection built into the winding.
- Pump type: multistage, submersible, made entirely of stainless steel
- Diameter: 98 mm (4")
- Minimum well diameter: 115 mm
- Power supply: 230 V (single-phase)
- Starting box: included – with a capacitor and overcurrent protection
- Power cable length: 20 m, with a plug
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical
- Max. liquid temperature: 35°C
- Max. immersion depth: 100 m
- Rotational speed: 2850 rpm
- Materials: suction and discharge body, housing, shaft, rotor, impeller, and diffuser – AISI 304 stainless steel, mechanical seal – SiC/SiC/NBR
IBO – 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water-engineering equipment with quality certificates.
Frequently asked questions (FAQ) – 4" ISPM submersible pump
What well is the 4" ISPM submersible pump suitable for?
The pump is intended for wells with a minimum internal diameter of 115 mm. Before purchasing, it is worth checking the actual diameter of the borehole to avoid installation problems or motor overheating.
Will the 20 m cable be long enough for my well?
The factory cable is 20 m long and fitted with a plug, which in most domestic wells eliminates the need for an extension. For deeper boreholes, any further extension should be entrusted to a professional.
What is the difference between 4" ISPM and 4" ISP?
4" ISPM is a version powered exclusively by single-phase 230 V and supplied with a starting box containing a capacitor and overcurrent protection. The same models in the 4" ISP series are also available in a three-phase 400 V version, without the need for a starting box, while the ISP series additionally includes higher-power models available only in 400 V.
What happens if the well runs out of water while the pump is operating?
The pump must not run “dry” – a lack of water may cause overheating and motor damage, and such a failure is not covered by the warranty. To prevent this, it is worth installing a dry-run protection device that monitors the water level in the well.
Where can I buy the 4" ISPM submersible pump?
Dambat does not sell directly. 4" ISPM series pumps are available from commercial partners, plumbing and installation wholesalers, and authorised online distributors.
What warranty terms apply to the 4" ISPM pump?
IBO – 24-month (2-year) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
