4" ISP 14-13 – deep-well pump with a 20 m cable
The 4" ISP deep-well pump is a multistage IBO design made entirely of stainless steel, intended for drawing and pumping raw water in single- and multi-family homes, farms, and industrial installations. The factory-installed 20 m cable with a plug eliminates the need for additional cable extensions at typical installation depths, while the thermal protection built into the winding protects the motor against overload.
Who it is for
-
Owners of single- and multi-family homes – the wide power range in the series makes it possible to select a model suited to the well depth and household water demand.
-
Farms and horticultural operations – the higher-output models in the series supply irrigation systems, sprinklers, and drip lines across larger areas.
-
Industrial plants and drainage installations – the all-stainless-steel construction is suitable for continuous operation.
-
Installers – the factory-installed 20 m cable with a plug shortens installation time at typical depths, without the need to connect cables.
Application
The 4" ISP series is intended for drawing and pumping clean, technically raw water from drilled deep-water intakes for single- and multi-family homes, farms, irrigation systems, and industrial and drainage installations. The pump is not a water-treatment device – when using it for other purposes, we recommend ensuring appropriate water preparation.
The pumps operate in a vertical position, in wells with a minimum internal diameter of 115 mm, at a maximum pumped-water temperature of 35°C. The 4" ISP 400 V deep-well pump works with standard pressure tanks and pressure-control systems selected according to the scale of the installation.
Features of the 4" ISP series
The 4" ISP series pumps are made entirely of AISI 304 stainless steel – from the suction and discharge body to the impeller and diffuser, ensuring corrosion resistance under typical operating conditions. The individual variants differ in their operating point on the shared performance curve and in their power supply, available in 230 V or 400 V versions depending on the model and motor power.
The 230 V version is equipped with a starting box with built-in overcurrent protection and a capacitor, while additional motor protection is provided by thermal protection built into the winding.
- Pump type: multistage, deep-well, entirely made of stainless steel
- Diameter: 98 mm (4")
- Minimum well diameter: 115 mm
- Power supply: 230 V or 400 V (depending on the model and motor power)
- Power cable length: 20 m, with a plug
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical
- Maximum liquid temperature: 35°C
- Maximum immersion depth: 100 m
- Rotational speed: 2850 rpm
- Materials: suction and discharge body, housing, shaft, rotor, impeller, and diffuser – AISI 304 stainless steel, mechanical seal – SiC/SiC/NBR
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water-management equipment with quality certifications.
Frequently asked questions (FAQ) – 4" ISP deep-well pump
Which well is the 4" ISP deep-well pump suitable for?
The pump is designed for wells with a minimum internal diameter of 115 mm. Before purchasing, it is worth checking the actual diameter of the borehole to avoid installation problems or motor overheating.
Will the 20 m cable be long enough for my well?
The factory-installed cable is 20 m long and has a plug, which makes it possible to avoid extending it in most residential wells. For deeper boreholes, any further extension should be entrusted to a professional.
What happens if the well runs out of water while the pump is operating?
The pump must not run “dry” – a lack of water may cause overheating and motor damage, and such a fault is not covered by the warranty. To prevent this, it is worth installing dry-run protection that monitors the water level in the well.
How do I select the right 4" ISP pump for my needs?
The choice of model depends on the well depth and the amount of water required simultaneously – the series includes variants with different head heights and capacities, from modest household needs to larger agricultural and industrial installations. If you have any doubts, we encourage you to contact the technical department.
Where can I buy a 4" ISP deep-well pump?
Dambat does not sell directly. 4" ISP series pumps are available from commercial partners, installation wholesalers, and authorized online distributors.
What warranty terms apply to the 4" ISP pump?
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
