4" FP4 Q100 – 400 V multistage submersible pump
The 4" FP4 Q100 submersible pump by IBO ITALY is a multistage Italian design made entirely of stainless steel, intended for drawing and pumping raw water in single- and multi-family homes, farms, and industrial and fire protection systems. DRY RUN PRO technology increases resistance to seizing when running dry, while the option of horizontal or vertical installation offers greater flexibility.
Who it’s for
-
Owners of single- and multi-family homes – the series’ wide range of power ratings and capacities lets you choose a model to match the well depth and water demand.
-
Farms and horticultural operations – higher-output models in the series supply irrigation systems, sprinklers, and drip lines.
-
Industrial and fire protection systems – the all-stainless-steel construction and ability to operate horizontally make it suitable for non-standard installation configurations.
-
Installers – the option to order a cable in lengths in multiples of 5 m makes it easier to match the depth of a particular well.
Applications
The 4" FP4 series is designed to draw and pump clean raw water from drilled deep wells for single- and multi-family homes, farms, irrigation systems, fire protection systems, industry, and drainage. The design tolerates sand content of up to 185 g/m³. The pump does not treat water – if using it for other purposes, we recommend ensuring suitable water treatment.
The pumps operate vertically or horizontally in wells with a minimum internal diameter of 115 mm, at a maximum pumped water temperature of 35°C. The 4" FP4 230 V / 400 V submersible pump works with standard pressure tanks and pressure control systems.
Features of the 4" FP4 series
The 4" FP4 series pumps are made entirely of AISI 304 stainless steel – suction and discharge body, housing, shaft, and rotor – ensuring corrosion resistance under typical operating conditions. The impeller and diffuser are made of polyamide (PA), and the mechanical seal uses a SiC/SiC/NBR configuration. Built-in floating impellers and a check valve that limits water flowing back from the system complete the design.
DRY RUN PRO technology increases the motor’s resistance to seizing if it briefly runs dry. The 230 V version is supplied with a start box containing a capacitor and overcurrent protection, as well as thermal protection built into the motor winding.
- Pump type: multistage, submersible, entirely made of stainless steel
- Diameter: 98 mm (4")
- Minimum well diameter: 115 mm
- Power supply: 230 V or 400 V
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Maximum liquid temperature: 35°C
- Permissible sand content: up to 185 g/m³
- Maximum number of starts per hour: 30
- Power cable: 1.5 m (longer cable available in multiples of 5 m)
- Rotational speed: 2850 rpm
- Materials: suction and discharge body, housing, shaft, and rotor – AISI 304 stainless steel, impeller and diffuser – polyamide (PA), mechanical seal – SiC/SiC/NBR
- Additional features: built-in check valve, floating impellers, DRY RUN PRO technology
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently Asked Questions (FAQ) – 4" FP4 submersible pump
What kind of well is the 4" FP4 submersible pump suitable for?
The pump is designed for wells with a minimum internal diameter of 115 mm. Before purchasing, it is worth checking the actual borehole diameter to avoid installation problems or motor overheating.
What makes the 4" FP4 pump stand out?
The pump uses DRY RUN PRO technology, which increases resistance to seizure in the event of temporary dry running, and can be installed in both vertical and horizontal positions. Built-in floating impellers and a check valve further extend the device’s service life.
How does the 4" FP4 pump differ from the IBO 4" SD pump?
Both series have similar applications and diameters, but differ in the material of the pump body – the 4" FP4 has a suction and discharge body made entirely of stainless steel, while the 4" SD uses brass. Your choice also depends on whether you need horizontal installation, which is available only for the 4" FP4 series.
How do I choose a 4" FP4 pump model to suit my needs?
Choosing a model depends on the depth of the well and the amount of water needed at once – the series includes a wide range of options with different delivery heights and capacities, from modest household needs to larger agricultural and industrial installations. W If you have any questions, please contact our technical department.
Where can I buy a 4" FP4 submersible pump?
Dambat does not sell directly. 4" FP4 series pumps are available from retail partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 4" FP4 pump?
IBO ITALY – 36 months (3 years) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.