Multistage submersible pump IBO ITALY 4" FP4 F055 (4 kW, 400 V)
The FP4 series submersible pump is an advanced centrifugal device made of stainless steel, designed for wells with a minimum diameter of 115 mm. A 4 kW motor powered by three-phase voltage ensures efficient pumping of cold water at temperatures up to 35°C in extensive hydraulic systems.
For whom (B2B)
-
Installation and drilling companies: Technology of increased dry running resistance and solid construction reduce the risk of defects reported by investors.
-
Agricultural and horticultural farms: High efficiency and powerful lifting parameters guarantee stable performance Power supply professional sprinkler systems and drip lines.
-
Industrial plants: three-phase motor and stainless steel materials work well in fire protection systems. and installations supplying process water.
-
Plumbing wholesalers and stores: a pump certified for pumping drinking water expands the range for demanding customers looking for anti-sand pumps with 400 V motors.
Application
Pump IBO ITALY 4" FP4 F055 was designed to supply clean water to single-family houses, multi-family houses and large farms. The device successfully operates water supply installations, irrigation networks and supplies water for drainage and fire protection systems. It will work wherever water drawn from drilled intakes is free from grinding elements, although the structure has increased tolerance to sand content (up to 5%).
Due to its large capacity and diameter of 98 mm, the unit is intended for installation in deep wells, guaranteeing a constant supply of medium. It is essential to remember that a pump operating in large tanks or wells with a diameter larger than 115 mm requires the installation of a special cooling jacket to protect the 4 kW motor from overheating and seizing.
Features, description and technical data
The multi-stage rotor system of the FP4 F055 model uses the innovative DRY RUN PRO technology. This hardware solution increases the resistance of the hydraulics in the event of accidental and temporary operation without access to water. In addition, the user has a built-in check valve, which effectively prevents impacts of the returning liquid column in the pipeline.
The design combines an efficient three-phase motor, achieving a maximum capacity of up to 180 l/min (approximately 10.8 m³/h), with an impressive lifting height of 201 meters. The device with a factory power cable is designed for direct connection and extension depending on individual installation depths (e.g. using heat-shrinkable joints).
- Device type: Submersible pump
- Pump diameter: 4" (98 mm)
- Minimum well diameter: 115 mm
- Power supply: 400 V (three-phase)
- Engine power: 4 kW
- Maximum efficiency: 180 l/min
- Maximum lifting height: 201 m
- Maximum temperature of pumped water: 35°C
- Maximum sand content: up to 5%
- Length of the power cord: standard short (can be connected to a specific length - multiple of 5 m)
- Additional features: DRY RUN PRO technology (resistance to dry running), built-in non-return valve
FAQ – IBO ITALY 4 FP4 F055 submersible pump (B2B)
Where are FP4 series pumps distributed?
Where are FP4 series pumps distributed?
+
IBO ITALY 4 FP4 F055 (4 kW, 400 V) can be found in industry retail outlets and wholesalers cooperating with the IBO brand.
How is repair and warranty service performed?
How is repair and warranty service performed?
+
The warranty is 36 months. The only authorized one service is run by Dambat, which comprehensively carries out repairs and inspections of devices IBO ITALY.
What does DRY RUN PRO technology offer in practice?
What does DRY RUN PRO technology offer in practice?
+
This is a specialized solution that prevents rapid damage to the rotors. It is distinguished by increased resistance to seizures in critical moments of temporary operation of the device without access to the appropriate water level in the well.
How does the equipment deal with sand in the water?
How does the equipment deal with sand in the water?
+
The model has an anti-sand construction that allows pumping liquids containing up to 5% sand. Despite the increased resistance, be careful not to use the pump excessively in heavily polluted conditions, as this leads to accelerated wear of the hydraulics.
When should an external cooling pipe (jacket) be used?
When should an external cooling pipe (jacket) be used?
+
The engines of these devices are cooled by gravity flowing water. The use of an additional protective jacket to enforce proper flow of the medium is necessary if the diameter of the well in which the unit is installed significantly exceeds the dedicated dimensional parameters provided by the manufacturer.
Can this multistage pump work with a generator?
Can this multistage pump work with a generator?
+
Yes, but due to the three-phase 4 kW motor and very high starting current, the generator must have a rated power that is 3 to 5 times higher than the engine power. Moreover, the pump may only be switched on to a previously started voltage generator.
Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.
