Description
4" FP4 F010 – 400 V multistage submersible pump
The 4" FP4 F010 submersible pump from IBO ITALY is a multistage Italian design made entirely of stainless steel, intended for extracting and pumping raw water in single- and multi-family homes, farms, and industrial and firefighting systems. DRY RUN PRO technology increases resistance to seizure in the event of dry running, while the option of horizontal or vertical installation provides greater installation flexibility.
Who it is for
- Owners of single- and multi-family homes – the series offers a wide range of power and capacities, allowing you to select a model suited to the well depth and water demand.
- Farms and horticultural operations – the higher-output models in the series supply irrigation systems, sprinklers, and drip lines.
- Industrial and firefighting systems – the entirely stainless-steel construction and the option of horizontal operation are suitable for non-standard installation arrangements.
- Installers – the option to order a cable with a length selected in 5 m increments makes it easier to match the pump to the depth of a particular well.
Applications
The 4" FP4 series is designed for extracting and pumping technically clean raw water from drilled deep-water wells for single- and multi-family homes, farms, irrigation systems, firefighting systems, industry, and drainage. The construction tolerates sand content of up to 185 g/m³. The pump is not a water-treatment device – when using it for other purposes, we recommend ensuring suitable water preparation.
The pumps can operate vertically or horizontally, in wells with a minimum internal diameter of 115 mm, at a maximum pumped-water temperature of 35°C. The 4" FP4 230 V / 400 V submersible pump works with standard pressure tanks and pressure-control systems.
Features of the 4" FP4 series
The 4" FP4 series pumps are made entirely of AISI 304 stainless steel – including the suction and discharge body, housing, shaft, and rotor – providing corrosion resistance under typical operating conditions. The impeller and diffuser are made of polymer (PPO), while the mechanical seal uses a SiC/SiC/NBR configuration. Built-in floating impellers and a check valve that limits water backflow from the system complete the design.
DRY RUN PRO technology increases the motor’s resistance to seizure during brief periods of dry running. The 230 V version is supplied with a starting box containing a capacitor and overcurrent protection, as well as thermal protection built into the motor winding.
- Pump type: multistage, submersible, entirely stainless steel
- Diameter: 98 mm (4")
- Minimum well diameter: 115 mm
- Power supply: 230 V or 400 V
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Maximum liquid temperature: 35°C
- Permissible sand content: up to 185 g/m³
- Maximum number of starts per hour: 30
- Power cable: 1.5 m (longer cable available in 5 m increments)
- Rotational speed: 2850 rpm
- Materials: suction and discharge body, housing, shaft, and rotor – AISI 304 stainless steel, impeller and diffuser – PPO polymer, mechanical seal – SiC/SiC/NBR
- Additional features: built-in check valve, floating impellers, DRY RUN PRO technology
IBO ITALY – 36-month (3-year) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water-management equipment with quality certificates.
Frequently asked questions (FAQ) – 4" FP4 submersible pump
What type of well is the 4" FP4 submersible pump suitable for?
The pump is designed for wells with a minimum internal diameter of 115 mm. Before purchasing, it is worth checking the actual diameter of the borehole to avoid installation problems or motor overheating.
What distinguishes the 4" FP4 pump?
The pump uses DRY RUN PRO technology, which increases resistance to seizure during brief periods of dry running, and it can be installed both vertically and horizontally. Built-in floating impellers and a check valve further extend the service life of the device.
How does the 4" FP4 pump differ from the IBO 4" SD pump?
Both series have similar applications and diameters, but they differ in the body material – the 4" FP4 has a suction and discharge body made entirely of stainless steel, while the 4" SD uses brass for this component. The choice also depends on whether horizontal installation is required, which is available only in the 4" FP4 series.
How do I select the right 4" FP4 pump model for my needs?
The choice of model depends on the well depth and the amount of water needed at the same time – the series includes a wide range of variants with different heads and capacities, from modest domestic needs to larger agricultural and industrial installations. If you have any doubts, we encourage you to contact the technical department.
Where can I buy the 4" FP4 submersible pump?
Dambat does not sell directly to consumers. 4" FP4 series pumps are available from commercial partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 4" FP4 pump?
IBO ITALY – 36-month (3-year) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
- Power: 0.75 kW,
- Power supply: 300–400 V,
- Frequency: 50 Hz,
- Current draw: 2.2 A,
- Motor speed: 2850 rpm,
- Dimensions: 98/760 mm
- Weight: 12.1 kg,
4" FP4 F010 – 400 V multistage submersible pump
The 4" FP4 F010 submersible pump from IBO ITALY is a multistage Italian design made entirely of stainless steel, intended for extracting and pumping raw water in single- and multi-family homes, farms, and industrial and firefighting systems. DRY RUN PRO technology increases resistance to seizure in the event of dry running, while the option of horizontal or vertical installation provides greater installation flexibility.
Who it is for
- Owners of single- and multi-family homes – the series offers a wide range of power and capacities, allowing you to select a model suited to the well depth and water demand.
- Farms and horticultural operations – the higher-output models in the series supply irrigation systems, sprinklers, and drip lines.
- Industrial and firefighting systems – the entirely stainless-steel construction and the option of horizontal operation are suitable for non-standard installation arrangements.
- Installers – the option to order a cable with a length selected in 5 m increments makes it easier to match the pump to the depth of a particular well.
Applications
The 4" FP4 series is designed for extracting and pumping technically clean raw water from drilled deep-water wells for single- and multi-family homes, farms, irrigation systems, firefighting systems, industry, and drainage. The construction tolerates sand content of up to 185 g/m³. The pump is not a water-treatment device – when using it for other purposes, we recommend ensuring suitable water preparation.
The pumps can operate vertically or horizontally, in wells with a minimum internal diameter of 115 mm, at a maximum pumped-water temperature of 35°C. The 4" FP4 230 V / 400 V submersible pump works with standard pressure tanks and pressure-control systems.
Features of the 4" FP4 series
The 4" FP4 series pumps are made entirely of AISI 304 stainless steel – including the suction and discharge body, housing, shaft, and rotor – providing corrosion resistance under typical operating conditions. The impeller and diffuser are made of polymer (PPO), while the mechanical seal uses a SiC/SiC/NBR configuration. Built-in floating impellers and a check valve that limits water backflow from the system complete the design.
DRY RUN PRO technology increases the motor’s resistance to seizure during brief periods of dry running. The 230 V version is supplied with a starting box containing a capacitor and overcurrent protection, as well as thermal protection built into the motor winding.
- Pump type: multistage, submersible, entirely stainless steel
- Diameter: 98 mm (4")
- Minimum well diameter: 115 mm
- Power supply: 230 V or 400 V
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical or horizontal
- Maximum liquid temperature: 35°C
- Permissible sand content: up to 185 g/m³
- Maximum number of starts per hour: 30
- Power cable: 1.5 m (longer cable available in 5 m increments)
- Rotational speed: 2850 rpm
- Materials: suction and discharge body, housing, shaft, and rotor – AISI 304 stainless steel, impeller and diffuser – PPO polymer, mechanical seal – SiC/SiC/NBR
- Additional features: built-in check valve, floating impellers, DRY RUN PRO technology
IBO ITALY – 36-month (3-year) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and water-management equipment with quality certificates.
Frequently asked questions (FAQ) – 4" FP4 submersible pump
What type of well is the 4" FP4 submersible pump suitable for?
The pump is designed for wells with a minimum internal diameter of 115 mm. Before purchasing, it is worth checking the actual diameter of the borehole to avoid installation problems or motor overheating.
What distinguishes the 4" FP4 pump?
The pump uses DRY RUN PRO technology, which increases resistance to seizure during brief periods of dry running, and it can be installed both vertically and horizontally. Built-in floating impellers and a check valve further extend the service life of the device.
How does the 4" FP4 pump differ from the IBO 4" SD pump?
Both series have similar applications and diameters, but they differ in the body material – the 4" FP4 has a suction and discharge body made entirely of stainless steel, while the 4" SD uses brass for this component. The choice also depends on whether horizontal installation is required, which is available only in the 4" FP4 series.
How do I select the right 4" FP4 pump model for my needs?
The choice of model depends on the well depth and the amount of water needed at the same time – the series includes a wide range of variants with different heads and capacities, from modest domestic needs to larger agricultural and industrial installations. If you have any doubts, we encourage you to contact the technical department.
Where can I buy the 4" FP4 submersible pump?
Dambat does not sell directly to consumers. 4" FP4 series pumps are available from commercial partners, plumbing wholesalers, and authorized online distributors.
What warranty terms apply to the 4" FP4 pump?
IBO ITALY – 36-month (3-year) manufacturer’s warranty. Warranty and post-warranty service is provided by Dambat.