4" FP4 D010 – multistage submersible pump 400 V
4" FP4 D010 submersible pump IBO ITALY is a multi-stage, entirely Italian construction
made of stainless steel, intended for supplying water to single- and multi-family houses,
agricultural farms and industrial and fire protection installations. DRY RUN PRO technology
increases resistance to seizure in the case of dry operation, and can be installed in position
horizontal or vertical increases installation flexibility.
For whom
-
Owners of single- and multi-family houses – a wide range of power and efficiency in the series allows you to select the model to suit the depth of the well and water demand.
-
Agricultural and horticultural farms – higher models of the series power irrigation systems, sprinklers and drip lines.
-
Industrial and fire protection installations – the construction made entirely of stainless steel and the ability to work in a horizontal position make it suitable for non-standard installation arrangements.
-
Installers – the possibility of ordering a cable with a length selected in multiples of 5 m makes it easier to adjust it to the depth of a specific well.
Application
The 4" FP4 series is intended for collecting clean water from drilled deep wells
for the needs of single- and multi-family houses, farms, irrigation systems,
fire protection installations, industry and drainage. The design tolerates the contents
sand up to 185 g/m³.
The pumps operate in a vertical or horizontal position, in wells with a minimum internal diameter
115 mm, with a maximum temperature of pumped water up to 35°C. 4" FP4 400 V submersible pump works with standard hydrophore tanks and automation
pressure.
Features of the 4" FP4 series
4" FP4 series pumps are made entirely of AISI 304 stainless steel – body
suction and discharge, housing, shaft and rotor – which ensures corrosion resistance in typical conditions
operation. The impeller and diffuser are made of polyamide (PA), and the mechanical stuffing box works
in the SiC/SiC/NBR system. Built-in floating impellers and a check valve limiting the return
water from the installation completes the structure.
DRY RUN PRO technology increases the engine's resistance to seizure in the event of temporary operation
dry. The 230 V version includes additional overcurrent and thermal protection built into the motor winding.
- Pump type: multi-stage, deep-seat, entirely made of stainless steel
- Diameter: 98 mm (4")
- Minimum well diameter: 115mm
- Power supply: 400V
- Insulation class: F
- Degree of protection: IP68
- Working mode: continuous
- Working position: vertical or horizontal
- Max. liquid temperature: 35°C
- Permissible sand content: up to 185 g/m³
- Max. number of starts per hour: 30
- Power cable: 1.5 m (possibility to select a longer cable in multiples of 5 m)
- Rotational speed: 2850 rpm
- Materials: suction and pressure body, housing, shaft and rotor – AISI 304 stainless steel, impeller and diffuser – polyamide (PA), mechanical stuffing box – SiC/SiC/NBR
- Additionally: built-in check valve, floating impellers, DRY RUN PRO technology
IBO ITALY – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – 4" FP4 submersible pump
Which well is the 4" FP4 submersible pump suitable for?
The pump is designed for wells with a minimum internal diameter of 115 mm. Before purchasing
it is worth checking the actual diameter of the hole to avoid installation problems or
engine overheating.
What makes the 4" FP4 pump unique?
The pump uses DRY RUN PRO technology, which increases resistance to seizing in the event of a seizure
temporary dry operation, and can be mounted both vertically and horizontally.
Built-in floating impellers and a non-return valve further extend the life of the device.
What is the difference between the 4" FP4 pump and the IBO 4" SD pump?
Both series have similar applications and diameters, but differ in body material -
The 4" FP4 has a full stainless steel suction and discharge body, while the 4" SD uses
plus brass. The choice also depends on the need for installation in a horizontal position, which is only available
in the 4" FP4 series.
How to choose a 4" FP4 pump model for my needs?
The choice of model depends on the depth of the well and the amount of water needed at the same time - series
covers a wide range of variants with different lifting heights and capacities, from
small domestic needs to larger agricultural and industrial installations. In case
If you have any doubts, we encourage you to do so contact the technical department.
Where can you buy a 4" FP4 submersible pump?
Dambat does not sell directly. 4" FP4 series pumps are available
from trading partners, installation wholesalers and authorized distributors
online.
What warranty conditions apply to the 4" FP4 pump?
IBO ITALY – 36 months (3 years) manufacturer's warranty. Warranty and post-warranty service
Dambat assures.
