Multistage submersible pump IBO ITALY 4" FP4 B030 (2.2 kW, 400 V)
An advanced 4-inch submersible pump with a diameter of 98 mm and an engine power of 2.2 kW, using the proven DRY RUN PRO technology. The innovative material solutions used in the device ensure high efficiency and above-average resistance to the content of abrasive agents in the pumped medium. The design is adapted to work in wells with a minimum internal diameter of 115 mm.
For whom (B2B)
-
Drilling and installation companies: the unique DRY RUN PRO technology significantly increases the device's resistance to seizures in the event of temporary dry operation, which minimizes the risk of damage to the hydraulic system at the start-up stage and in conditions of variable water level.
-
Agricultural and horticultural farms: impressive lifting height (274 m) allows for Power supply extensive, high-pressure irrigation systems, sprinklers and long lines of drip lines.
-
Water utilities and industrial plants: the possibility of versatile operation both vertically and horizontally (within a cooling jacket) makes the equipment ideal for servicing process water intakes and fire protection installations.
Application
Pump IBO ITALY FP4 B030 is a durable device for pumping water from deep wells. It works perfectly as Power supply clean water in single- and multi-family houses, commercial buildings and large farms. This solution is the heart of efficient irrigation systems that require stable and high pressure.
Thanks to the use of corrosion-resistant components, the device can be used in the industrial sector, drainage systems and in demanding fire protection applications. The unit can be installed both vertically and horizontally if it is mounted in an appropriate tank with a jacket forcing cooling circulation.
Features, description and technical data
Pump under construction IBO ITALY FP4 has implemented an optimized hydraulic system that allows a maximum content of abrasive agents of up to 185 g/m³. The connections (suction and discharge) and the shaft with the rotor are made of AISI 304 stainless steel, which protects the system against corrosion. Special impellers and diffusers are made of advanced PA polymer using DRY RUN PRO technology, increasing operational safety in the absence of medium.
The unit is powered by three-phase voltage and is designed for demanding continuous operation. The 4" motor with a connection socket compliant with the NEMA standard has a higher insulation class F and is protected by a mechanical choke (Ceramics/SiC/NBR). The structure is equipped with a built-in check valve, which facilitates the construction of a pressure water installation.
- Device type: Multistage submersible pump
- Pump diameter: 4" (98 mm)
- Required minimum internal diameter of the well: 115 mm
- Power supply: 3~400V
- Frequency: 50 Hz
- Engine power: 2.2 kW
- Current: 5.6 A
- Maximum capacity: 60.0 l/min
- Maximum lifting height: 274.0 m
- Motor speed: 2850 rpm
- Discharge port size / Connection [DN/inch]: 1 1/4"
- Insulation class: F
- Operating mode: continuous
- Degree of protection: IP68
- Working position: Vertical/Horizontal
- Maximum liquid temperature: 35°C
- Maximum number of starts per 1 hour: 30
- Maximum immersion depth: 200 m
- Power cable length: 1.5 m
- Dimensions diameter/height: 98 / 1602 mm
- Weight: 23.2 kg
- Connection socket according to the NEMA standard: 4"
- Max. sand content: 185 g/m³
- Materials: suction/discharge port, shaft and rotor (AISI 304 stainless steel); impeller and diffuser (PA); mechanical seal (Ceramics/SiC/NBR)
- Protection: DRY RUN PRO technology
FAQ – IBO ITALY 4 FP4 B030 (B2B)
Where is this product sold?
Where is this product sold? +
IBO ITALY 4 FP4 B030 (2.2 kW, 400 V) deep well pump can be found in industry retail outlets and wholesalers cooperating with the IBO brand.
Where and how to perform warranty repairs?
Where and how to perform warranty repairs? +
This model comes with an extended warranty of 36 months. The only authorized one service is conducted by the manufacturer, to whom the device is reported via a special online form.
What are the characteristics of DRY RUN PRO technology?
What are the characteristics of DRY RUN PRO technology? +
This is an original material solution used in the construction of impellers and diffusers, which significantly slows down the heating process of hydraulic elements and reduces the risk of the pump seizing up in the event of a temporary lack of water supply.
How to mount this pump in a horizontal position?
How to mount this pump in a horizontal position? +
The unit allows operation in the horizon, but for such installation (e.g. in large tanks or lakes) it is absolutely necessary to install an external cooling jacket, which will force the engine to have an appropriate flow of liquid.
Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.
