IBO 3" TI 20 – multi-stage submersible pump for small wells 230 V
The 3" TI series by IBO are multi-stage deep well pumps with a diameter of 75 mm, designed for wells with a minimum internal diameter of 85 mm. Increased resistance to sand and floating impellers ensure reliable operation even in more difficult intake conditions. A built-in capacitor and a 20 m cable with a plug make the pump ready for installation immediately after unpacking.
For whom
-
Owners of single-family and multi-family houses – the 3" TI series by IBO ensures reliable raw water intake from your own deep well, operating continuously throughout the year.
-
Farms – increased sand resistance and AISI 304 stainless steel construction guarantee reliability in intensive use, both for watering animals and powering irrigation systems.
-
Irrigation system owners – the pump works as a source of water for sprinklers and drip lines, as well as in drainage installations.
-
Installers and well companies – 75 mm diameter allows installation in holes with a diameter of 85 mm and above, and the built-in capacitor eliminates the need for an external starting box and shortens the startup time.
Application
The 3" TI series by IBO is intended for drawing water from deep and drilled wells with a minimum internal diameter of 85 mm, for the needs of single-family houses, multi-family houses and farms. The pump works equally well in powering irrigation systems - sprinklers and drip lines - and in drainage installations.
IBO 3" TI submersible pumps operate in a vertical position, immersed to a maximum depth of 80 m, with a power supply of 1 ~ 230 V / 50 Hz. The permissible temperature of the pumped liquid is up to 35°C. Pumps are not water treatment devices - when using it for other purposes, we recommend ensuring appropriate preparation.
Features of the 3" TI series by IBO – description and technical data
IBO 3" TI series deep well pumps are multi-stage centrifugal devices with an external diameter of 75 mm. The use of floating impellers and increased resistance to sand allow for reliable operation in intakes where standard pumps could be subject to accelerated wear. The engine is oil-cooled, the housing, shaft and rotor are made of AISI 304 stainless steel, impellers and diffusers are made of PPO polymer, and the suction and discharge bodies are made of brass.
The series includes four models differing in power and lifting height - from 3" TI 15 (0.37 kW, up to 60 m) to 3" TI 37 (1.1 kW, up to 152 m), with a constant capacity of 50 l/min. The built-in capacitor eliminates the need to use an external starter box, and the 20 m/1.5 m cable (CHANGE WITH A SPECIFIC CARD) with a plug allows you to start the installation without additional electrical equipment.
- Pump type: multi-stage, deep-sea
- Minimum well diameter: 85mm
- Power supply: 1~ 230V / 50Hz
- Degree of protection: IP68
- Insulation class: B
- Working mode: continuous
- Mounting position: vertical
- Max. immersion depth: 80 m
- Max. temperature of pumped liquid: 35°C
- Power cable: 20 m
- Capacitor: built into the engine – no need for an external starter box
- Thermal protection: built into the motor winding
- Engine cooling: oil
- Housing, shaft and rotor material: AISI 304 stainless steel
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – IBO 3" TI submersible pump
What is the IBO 3" TI series submersible pump used for?
The 3" TI series by IBO is intended for drawing water from wells with a minimum diameter of 85 mm, for the needs of single-family and multi-family houses, farms and irrigation and drainage systems.
How to choose the right model from the 3" TI series?
All models of the series have a constant capacity of 50 l/min - they differ in lifting height: TI 15 to 60 m, TI 20 to 82 m, TI 27 to 110 m, TI 37 to 152 m. The selection depends on the depth of the well and the required pressure in the installation. If you have any doubts, please contact the Dambat technical department.
Does the 3" TI pump require an external starter box?
No - the capacitor is built directly into the pump motor, which eliminates the need for an external starter box and simplifies the electrical installation.
Is the IBO 3" TI pump covered by the manufacturer's warranty?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Where can you buy the IBO 3" TI submersible pump?
As a manufacturer, we do not sell directly. IBO 3" TI series pumps are available from our trading partners, installation wholesalers and authorized online distributors.
How deep can the IBO 3" TI pump be installed?
3" TI series pumps can be submerged to a maximum depth of 80 m and operate only in a vertical position. They are available with a 20 m cable with a plug or 1.5 m - depending on the installation requirements.
