IBO 3 Ti 15 (0.37 kW, 230 V) submersible pump with 20 m cable
IBO 3 Ti 15 is a multi-stage submersible pump with a diameter of 3 inches (75 mm), characterized by increased resistance to sand. The device, factory-equipped with a 20-meter power cable, is designed for installation in wells with a minimum internal diameter of 85 mm, guaranteeing a reliable water supply.
For whom (B2B)
-
Irrigation system installers: efficient pump for powering sprinklers and advanced drip lines in agriculture and horticulture.
-
Well companies: proven equipment with increased sand resistance for narrower drilled wells (from 85 mm internal diameter).
-
Agricultural enterprises: a durable solution for permanent water supply of farms and livestock buildings.
-
Plumbing wholesalers: wanted model of a 3-inch pump with PZH certificate and built-in starting capacitor.
Application
The IBO 3 Ti 15 submersible pump is intended primarily for efficient water supply to single- and multi-family houses and farms. The device is perfect for powering various types of irrigation systems, which is crucial when cultivating and maintaining green areas.
Thanks to its innovative design characterized by increased resistance to sand, this model is widely used in wells where the water may be slightly contaminated with sand particles. Pumps of this series are also successfully used in professional drainage works.
Features
- Increased sand resistance.
- PZH certificate.
- 20 m power cable with plug.
- Capacitor built into the engine (no need to use an external starter box).
- Thermal protection built into the motor winding.
- Top quality materials.
- Warranty and post-warranty service.
- 24-month warranty.
Technical data
- Diameter: 3"
- Lifting: 60 m
- Capacity: 50 l/min
- Power: 0.37 kW
- Power supply: 230V
- Frequency: 50 Hz
- Current: 3.2 A
- Motor speed: 2850 rpm.
- Insulation class: B
- Operating mode: continuous
- Degree of protection: IP68
- Connection: 1 inch
- Working position: vertical
- Max. liquid temperature: 35°C
- Maximum number of starts per hour: 20
- Max. immersion depth: 100 m
- Power cable length: 20 m
- Dimensions (diameter/height): 76 / 427 mm
- Weight: 7.6 kg
Materials
- Suction/discharge port: brass
- Housing: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller: PPO polymer
- Diffuser: PPO polymer
- Mechanical seal: Ceramic / SiC / NBR
- Oil-cooled engine
FAQ – IBO 3 Ti 15
Where is this product sold?
Where is this product sold?
+
The IBO 3 Ti 15 (0.37 kW, 230 V) submersible pump with a 20 m cable can be found in industry retail outlets and wholesalers cooperating with the IBO brand.
Do I need to buy a starter box for this pump?
Do I need to buy a starter box for this pump?
+
No, the IBO 3 Ti 15 model has a capacitor built directly into the engine, so there is no need to use an external starter box. The cable is terminated with a standard plug.
What are the requirements for the well diameter?
What are the requirements for the well diameter?
+
The pump itself has an external diameter of 75 mm (3 inches) and is therefore intended for installation in boreholes and wells with a minimum internal diameter of 85 mm.
Will the pump fail if there is sand in the water?
Will the pump fail if there is sand in the water?
+
The design of the IBO Ti series submersible pump has the so-called increased resistance to sand, thanks to which it tolerates small impurities in the pumped water better than classic models.
Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.
