IBO 3 SD 33 (1.1 kW, 400 V) submersible pump with 1.5 m cable
The IBO 3 SD 33 (1.1 kW, 400 V) submersible pump with a 1.5 m cable is a multi-stage device with a diameter of 75 mm intended for operation in wells with an internal diameter of 85 mm and above. The structure based on brass and AISI 304 stainless steel elements ensures stable operation in various conditions. Proven technology with increased tolerance to abrasive agents makes it easier to select the device for efficient water supply systems.
For whom B2B
-
Installation and drilling companies: The narrow diameter of 75 mm makes it easy to install in standard wells, and the solid construction reduces the risk of service calls.
-
Irrigation system designers: specific parameters (lifting up to 117.0 m, efficiency 70.0 l/min) guarantee precise selection of the pump to power sprinklers and drip lines.
-
Wholesale and technical stores: expands the storage offer in the water distribution segment with a reliable model with increased resistance to abrasive agents.
-
Farms: A 1.1 kW motor designed for continuous operation ensures uninterrupted water supply for domestic and technological purposes.
Application
The pump operates in installations supplying water to buildings, production plants and farms. Due to the increased resistance to abrasive agents in the pumped medium (up to 5%), the device effectively powers irrigation systems, including field sprinklers and extensive drip lines. An outer diameter of only 3" (75 mm) allows the pump to be safely installed in narrow deep wells where the minimum inner diameter of the casing pipe reaches 85 mm.
The device pumps only clean water, free of long-fibre impurities, flammable or explosive substances. The oil-cooled motor with thermal protection built into the winding is factory-set for continuous operation in a vertical position. The maximum temperature of the pumped liquid does not exceed 35°C, which determines the optimal and failure-free functioning of hydraulic elements - including PPO polymer diffusers - in professional hydrophore and power supply systems.
Features
- Increased sand resistance
- PZH certificate
- 1.5 m power cable with free terminals
- Thermal protection built into the motor winding
- Top quality materials
- Warranty and post-warranty service
- 24-month warranty
Technical data
- Diameter: 3”
- Lift: 117.0 m
- Capacity: 70.0 l/min.
- Power: 1.1 kW
- Power supply: 3~400V
- Frequency: 50 Hz
- Current: 2.8 A
- Motor speed: 2850 rpm.
- Insulation class: B
- Operating mode: continuous
- Degree of protection: IP68
- Connection [DN/inches]: 1¼
- Working position: Vertical
- Max. liquid temperature: 35°C
- Maximum number of starts per hour: 20
- Max. immersion depth: 100 m
- Power cable length: 1.5 m
- Diameter/height: 75/1660 mm
- Weight: 13.0 kg
Materials
- Suction/discharge port: brass
- Housing: AISI 304 stainless steel
- Shaft and rotor: AISI 304 stainless steel
- Impeller: PPO polymer
- Diffuser: PPO polymer
- Mechanical seal: Ceramic/SiC/NBR
- Oil-cooled engine
FAQ IBO 3 SD 33
Where is this product sold?
Where is this product sold?
+
The IBO 3 SD 33 (1.1 kW, 400 V) submersible pump with a 1.5 m cable can be found in industry retail outlets and wholesalers cooperating with the IBO brand.
What is the permissible content of abrasive agents in the pumped medium?
What is the permissible content of abrasive agents in the pumped medium?
+
This model has increased resistance, which allows it to pump medium with a maximum content of abrasive agents not exceeding 5%.
In which wells can this pump model be installed?
In which wells can this pump model be installed?
+
The outer diameter of the device is 75 mm (3"), which allows it to be installed in drill holes with a minimum inner diameter of 85 mm.
What is the warranty and service of this device?
What is the warranty and service of this device?
+
The warranty is 24 months. The only authorized one service is run by Dambat.
Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.
