3" IBQ 5-10 – submersible pump
The IBO 3" IBQ submersible pump is a multistage design with a high-speed motor, intended for drawing and pumping raw water in single-family homes and farms, as well as for irrigation, drainage, and industrial applications. The inverter integrated with the motor provides a smooth start without water hammer and a wide range of tolerated supply voltage, while the drive’s smaller dimensions facilitate installation in narrow boreholes.
Who is it for?
-
Owners of single-family homes – the compact design fits narrow wells, while the wide supply-voltage range (160–250 V) increases resistance to fluctuations in the power grid.
-
Farms and horticultural operations – higher-output models supply irrigation systems and drip lines without the need for a larger motor.
-
Industrial and drainage installations – the smooth start reduces mechanical and electrical loads during frequent pump starts.
-
Installers – the smaller motor dimensions, while maintaining the same hydraulic parameters, reduce borehole and installation costs.
Applications
The 3" IBQ series is intended for drawing raw water from boreholes and open water reservoirs for single-family homes, farms, garden and orchard irrigation, site drainage, and supplying water-supply and industrial systems with raw water before treatment. The pump does not treat water – when using it for other purposes, we recommend ensuring appropriate water preparation.
The pumps operate on single-phase power over a wide range of 160–250 V, with a maximum pumped-liquid temperature of 35°C. The 3" IBQ 230 V submersible pump is compatible with a pressure tank with a capacity of at least 80 l, as required by the motor’s smooth-start characteristics.
Features of the 3" IBQ series
IBO 3" IBQ series pumps are equipped with a high-speed motor (6000 rpm) using permanent magnets and an inverter. The inverter does not regulate pump output according to water demand – its purpose is to increase and maintain the motor’s high speed, which, with the same hydraulic parameters, allows a smaller motor to be used than in a traditional pump.
The inverter provides a smooth start lasting several seconds, without a sudden increase in current draw or water hammer in the installation. It also monitors the motor’s current draw and switches the pump off if dry running is detected. The body, housing, shaft, and rotor are made of AISI 304 stainless steel, while the impeller and diffuser are made of PPO polymer.
- Pump type: multistage, submersible, with a high-speed motor
- Max. pump diameter: 78 mm (3")
- Power supply: 160–250 V (single-phase)
- Motor speed: 6000 rpm
- Protection rating: IP68
- Insulation class: F
- Operating mode: continuous
- Max. liquid temperature: 35°C
- Power cable: 20 m
- Minimum pressure-tank capacity: 80 l
- Materials: suction and discharge body, housing, shaft, and rotor – AISI 304 stainless steel, impeller and diffuser – PPO polymer, mechanical seal – SiC/SiC/NBR
- Motor: oil-cooled, equipped with an inverter
IBO – 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – IBO 3" IBQ submersible pump
What type of well is the 3" IBQ submersible pump suitable for?
The maximum pump diameter is 78 mm, allowing installation in typical 3-inch drilled wells. Before purchasing, it is worth measuring the actual borehole diameter to avoid installation problems.
What makes the 3" IBQ pump stand out?
The pump uses a high-speed motor (6000 rpm) with permanent magnets and an inverter, allowing it to have smaller dimensions than a traditional motor while maintaining the same hydraulic parameters. The inverter also provides a smooth start without water hammer, a wide supply-voltage range (160–250 V), and built-in dry-run protection based on monitoring current draw.
Is a special pressure tank required for the 3" IBQ pump?
Due to its smooth start lasting several seconds, the pump should operate with a pressure tank with a minimum capacity of 80 l – a tank that is too small may cause the pump to start too frequently.
How do I choose the right 3" IBQ pump model for my needs?
The choice of model depends on the well depth and the amount of water needed at the same time – the series includes variants with different heads and outputs, from modest household needs to larger agricultural and industrial installations. If in doubt, we encourage you to contact the technical department.
Where can I buy the IBO 3" IBQ submersible pump?
Dambat does not sell directly. Pumps from the 3" IBQ series are available from trade partners, installation wholesalers, and authorized online distributors.
What warranty terms apply to the 3" IBQ pump?
IBO – 24-month (2-year) manufacturer’s warranty. Dambat provides warranty and post-warranty service.
