3.5" SCM 2-14 – multi-stage submersible pump 230 V
The 3.5" SCM series by IBO are multi-stage deep well pumps with a diameter of 90 mm, intended for wells with a minimum internal diameter of 100 mm. The built-in capacitor and 20 m cable with plug make the pump ready for installation right after unpacking. The series includes models with capacities from 70 to 120 l/min, adapted to various installation needs.
For whom
-
Owners of single-family and multi-family houses – the 3.5" SCM series by IBO ensures reliable raw water intake from its own deep well, operating continuously all year round.
-
Farms – models with a capacity of up to 120 l/min and a lifting height of up to 108 m are suitable for intensive use, both for watering animals and powering irrigation systems.
-
Irrigation system owners – the pump works as a source of water for sprinklers and drip lines, as well as in drainage installations.
-
Installers and well companies – diameter of 90 mm and minimum well diameter of 100 mm allow installation in a wider range of wells, and the built-in capacitor facilitates the installation process.
Application
The 3.5" SCM series by IBO is intended for drawing water from deep and drilled wells with a minimum internal diameter of 100 mm, for the needs of single-family houses, multi-family houses and farms. The pump works equally well in powering irrigation systems - sprinklers and drip lines - and in drainage installations.
3.5" SCM submersible pumps operate in a vertical position, submerged to a maximum depth of 80 m, with a power supply of 1~ 230 V / 50 Hz. The permissible temperature of the pumped liquid is up to 35°C. The pumps are not water treatment devices - when using it for other purposes, we recommend ensuring appropriate preparation.
Features of the 3.5" SCM series by IBO – description and technical data
IBO series 3.5" SCM submersible pumps are multi-stage centrifugal devices with an external diameter of 90 mm. The casing, shaft and rotor are made of AISI 304 stainless steel, impellers and diffusers are made of PPO polymer, and the suction and discharge bodies are made of gray cast iron. The engine is oil-cooled.
The 3.5" SCM series by IBO offers a wide range of hydraulic parameters - from the compact SCM 2/9 model to the efficient SCM 3/25 with a lifting height of 108 m. The built-in capacitor eliminates the need to use an external starter box, and a 20 m cable with a plug allows you to start the installation without additional electrical equipment.
- Pump type: multi-stage, deep-sea
- Minimum well diameter: 100mm
- Power supply: 1~ 230V / 50Hz
- Degree of protection: IP68
- Insulation class: B
- Working mode: continuous
- Mounting position: vertical
- Max. immersion depth: 80 m
- Max. temperature of pumped liquid: 35°C
- Power cable: 20 m with plug
- Capacitor: built into the engine – no need for an external starter box
- Thermal protection: built into the motor winding
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – 3.5" SCM submersible pump
What is the IBO 3.5" SCM series submersible pump used for?
The 3.5" SCM series by IBO is intended for drawing water from wells with a minimum diameter of 100 mm, for the needs of single-family and multi-family houses, farms and irrigation and drainage systems.
How to choose the right model from the 3.5" SCM series?
The series is divided into two families: models 2/9, 2/14 and 2/18 with a capacity of 70 l/min and models 3/18 and 3/25 with a capacity of 120 l/min. Within each family, the models differ in lifting height. The selection depends on the depth of the well, the required capacity and the pressure in the installation. If in doubt, we encourage you to contact with the Dambat technical department.
What is the difference between the 3.5" SCM series and the 3.5" SC series?
The 3.5" SCM series is powered by single-phase (1 ~ 230 V) and equipped with a built-in capacitor - intended for standard home and agricultural installations. The 3.5" SC series is a three-phase version (3 ~ 400 V), intended for facilities with three-phase power supply.
Is the 3.5" SCM pump covered by the manufacturer's warranty?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Where can you buy a 3.5" SCM submersible pump?
As a manufacturer, we do not sell directly. IBO 3.5" SCM series pumps are available from our trading partners, installation wholesalers and authorized online distributors.
