3,5" IPRO 3-19 (1.5 kW, 230 V) submersible pump with 20 m cable

IPRO 3.5" 3-19 (1.5 kW, 230 V) submersible pump with 20 m cable

IPRO The 3.5" 3-19 (1.5 kW, 230 V) is an advanced multistage submersible pump designed for installation in wells with a minimum internal diameter of 100 mm. The machine is characterized by increased resistance to sand and solid construction based on AISI 304 stainless steel. It provides high efficiency (110 l/min) and very high lifting capacity (105 m), perfect for agricultural and industrial circuits and in multi-family house installations.

For whom (B2B)

• Water system installers: They receive the unit assembled with a factory 20-meter cable and a capacitor integrated in the motor housing, which eliminates the requirement to install an external jumper box.
• Farms and growers: They gain a machine with increased tolerance to fine abrasive fractions, dedicated to powering agricultural drip lines and large irrigation circuits.
• Drilling and well companies: The compact cross-section (95 mm at the widest point) allows the pump to be safely placed in standard casing pipes with a diameter of 100 mm or more.
• Wholesale and technical stores: Expanding the range with a powerful, 1.5 kW model of a reliable submersible pump IPRO, with a 36-month manufacturer's warranty.

Application

Multistage submersible pump IPRO 3.5" 3-19 is used for stable and continuous water supply of single-family houses, multi-family buildings and large agricultural buildings. The design of the hydraulic system with increased resistance to sand works perfectly in more difficult geological zones, where the water may contain solid micropollutants. The machine reliably supplies professional irrigation networks, including sprinkler systems, and also strongly supports drainage systems in the field.

Thanks to the use of proven manufacturing technology and thermal protection built directly into the motor winding, the equipment maintains failure-free continuous operation and effectively protects the network against sudden overloads. The compact, 3.5-inch external format guarantees quick installation of the device in tight deep-water pipes. The 20-meter power cord with a plug used by the manufacturer significantly reduces the time and costs of implementing the device at the water intake.

Features

• Increased sand resistance
• Top quality materials
• Long, failure-free operation based on proven technology
• 20 m power cable with plug
• Capacitor built into the engine (no need to use an external starter box)
• Thermal protection built into the motor winding
• Warranty and post-warranty service
• 36-month warranty

Technical data

• Diameter: 3.5"
• Lift: 105.0 m
• Capacity: 110.0 l/min.
• Power: 1.5 kW
• Power supply: 1~230V
• Frequency: 50 Hz
• Current: 9.9 A
• Motor speed: 2850 rpm.
• Insulation class: F
• Operating mode: continuous
• Degree of protection: IP68
• Connection: 1½"
• Max. liquid temperature: 35°C
• Maximum number of starts per hour: 30
• Max. immersion depth: 150 m
• Power cable length: 20.0 m
• Dimensions diameter/height: 95/1333 mm
• Weight: 18.5 kg

Materials

• Suction/discharge port: AISI 304 stainless steel
• Housing: AISI 304 stainless steel
• Shaft and rotor: AISI 304 stainless steel
• Impeller: PPO polymer
• Diffuser: reinforced polycarbonate
• Mechanical seal: Ceramic/SiC/NBR
• Oil-cooled engine

FAQ – IPRO 3.5" 3-19 (1.5 kW, 230 V)

Where is this product sold?

What flow and lift parameters does this model achieve?

Is a starter box needed to install the pump?

Who should I send the equipment to in the event of a failure?

Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.