3,5" IPRO 3-16 (1.1 kW 230 V) submersible pump with 20 m cable

IPRO 3.5" 3-16 (1.1 kW 230 V) submersible pump with 20 m cable

IPRO 3.5" 3-16 (1.1 kW 230 V) is a multistage submersible pump with a diameter of 90 mm (3.5"), intended for installation in wells with a minimum internal diameter of 100 mm. The machine is characterized by increased resistance to sand and is based on structural elements made of AISI 304 stainless steel. It ensures high pumping efficiency when lifting up to 90 meters, and is widely used in powering buildings, farms and professional drainage circuits.

For whom (B2B)

• Water system installers: They receive assembled equipment with a factory 20-meter cable and a built-in capacitor, which shortens work time and eliminates the requirement to use an external jumper box.
• Agricultural and horticultural farms: They gain a machine with increased tolerance to sand, dedicated to stable power supply of agricultural drip lines and extensive irrigation networks.
• Drilling and well companies: The compact diameter of 90 mm allows the pump to be lowered safely and smoothly in standard casing pipes with a cross-section of 100 mm and above.
• Wholesale and technical stores: Expanding the range with a more powerful model of the brand's failure-free submersible pump IPRO, supported by a 36-month warranty period.

Application

Multistage submersible pump IPRO 3.5" 3-16 is successfully used for efficient and continuous water supply of single-family houses, multi-family buildings and specialized agricultural buildings. The design of the hydraulic system with increased sand resistance functions perfectly in more difficult geological profiles, where the pumped water often contains fine abrasive fractions. The device stably supplies extensive irrigation networks, including sprinkler systems, and strongly supports local drainage installations.

Thanks to the implementation of proven manufacturing technology and the integration of a thermal fuse inside the motor winding, the machine maintains proper continuous operation and effectively protects the system against overloads. The compact, 3.5-inch external cross-section ensures quick installation of the device in tight wells. The factory-installed 20-meter-long power cable significantly simplifies connection work at the top of the intake.

Features

• Increased sand resistance
• Top quality materials
• Long, failure-free operation based on proven technology
• 20 m power cable with plug
• Capacitor built into the engine (no need to use an external starter box)
• Thermal protection built into the motor winding
• Warranty and post-warranty service
• 36-month warranty

Technical data

• Diameter: 3.5"
• Lifting: 90.0 m
• Capacity: 100.0 l/min.
• Power: 1.1 kW
• Power supply: 1~230V
• Frequency: 50 Hz
• Current: 8.2 A
• Motor speed: 2850 rpm.
• Insulation class: F
• Operating mode: continuous
• Degree of protection: IP68
• Connection: 1½"
• Max. liquid temperature: 35°C
• Maximum number of starts per hour: 30
• Max. immersion depth: 150 m
• Power cable length: 20.0 m
• Dimensions diameter/height: 92/1224 mm
• Weight: 15.8 kg

Materials

• Suction/discharge port: AISI 304 stainless steel
• Housing: AISI 304 stainless steel
• Shaft and rotor: AISI 304 stainless steel
• Impeller: PPO polymer
• Diffuser: reinforced polycarbonate
• Mechanical seal: Ceramic/SiC/NBR
• Oil-cooled engine

FAQ – IPRO 3.5" 3-16 (1.1 kW 230 V)

Where is this product sold?

What is the maximum pressure in the discharge system?

Does the pump installation require the purchase of a separate electrical box?

Who should I send the equipment to in the event of a failure?

Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.